new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

FlexDraft: Flexible Speculative Decoding via Attention Tuning and Bonus-Guided Calibration

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

  • 8 authors
·
May 18

D-cut: Adaptive Verification Depth Pruning for Batched Speculative Decoding

Speculative decoding accelerates large language model (LLM) inference without compromising output quality. Recent parallel drafting methods further improve single-request performance by decoupling draft length from drafting latency, enabling longer drafts and higher mean accepted tokens (MAT). However, under high request concurrency, long drafts waste substantial computation on rejected tokens, increasing verification cost and potentially making speculative decoding slower than autoregressive decoding. We present D-Cut, an adaptive pruning method that selects draft tokens jointly across the batch and concentrates the verification budget on tokens most likely to be accepted. D-Cut is motivated by two observations. First, acceptance lengths vary considerably across concurrent requests; D-Cut therefore performs cross-request pruning, allocating the verification budget adaptively according to draft confidence. Second, verification cost depends strongly on the deployment environment, including GPU architecture and parallelism strategy; D-Cut incorporates a runtime cost model to adapt its pruning depth to the target environment. Experiments on dense and mixture-of-experts (MoE) models show that, under high concurrency, D-Cut improves the average speedup from \(1.26\times\) to \(1.65\times\), restores acceleration in dense-model configurations where long-draft baselines are slower than autoregressive decoding, and achieves up to \(3.0\times\) speedup over autoregressive decoding on MoE models.

  • 10 authors
·
Jul 15

SpecKV: Adaptive Speculative Decoding with Compression-Aware Gamma Selection

Speculative decoding accelerates large language model (LLM) inference by using a small draft model to propose candidate tokens that a larger target model verifies. A critical hyperparameter in this process is the speculation length γ, which determines how many tokens the draft model proposes per step. Nearly all existing systems use a fixed γ (typically 4), yet empirical evidence suggests that the optimal value varies across task types and, crucially, depends on the compression level applied to the target model. In this paper, we present SpecKV, a lightweight adaptive controller that selects γ per speculation step using signals extracted from the draft model itself. We profile speculative decoding across 4 task categories, 4 speculation lengths, and 3 compression levels (FP16, INT8, NF4), collecting 5,112 step-level records with per-step acceptance rates, draft entropy, and draft confidence. We demonstrate that the optimal γ shifts across compression regimes and that draft model confidence and entropy are strong predictors of acceptance rate (correlation approx 0.56). SpecKV uses a small MLP trained on these signals to maximize expected tokens per speculation step, achieving a 56.0% improvement over the fixed-γ=4 baseline with only 0.34 ms overhead per decision (<0.5% of step time). The improvement is statistically significant (p < 0.001, paired bootstrap test). We release all profiling data, trained models, and notebooks as open-source artifacts.

  • 1 authors
·
May 4

DSpark: Confidence-Scheduled Speculative Decoding with Semi-Autoregressive Generation

Speculative decoding accelerates Large Language Model (LLM) inference by decoupling draft generation from target verification. While recent parallel drafters efficiently propose long token sequences in a single forward pass, they suffer from rapid acceptance decay due to a lack of inter-token dependencies. Furthermore, indiscriminately verifying these extended blocks wastes critical batch capacity on tokens with high rejection risks, severely degrading throughput in high-concurrency serving systems. We introduce DSpark, a speculative decoding framework that unifies high-throughput parallel generation with adaptive, load-aware verification. To maintain draft quality, DSpark utilizes a semi-autoregressive architecture, coupling a parallel backbone with a lightweight sequential module, to introduce intra-block dependency modeling and mitigate suffix decay. To optimize system efficiency, DSpark employs confidence-scheduled verification, dynamically tailoring the verification length for each request based on estimated prefix survival probabilities and engine-specific throughput profiles. On offline benchmarks across diverse domains, DSpark substantially improves the accepted length over state-of-the-art autoregressive and parallel drafters. When deployed within the DeepSeek-V4 serving system under live user traffic, DSpark successfully mitigates verification waste. Compared to the established production baseline (MTP-1), DSpark accelerates per-user generation speeds by 60 to 85 percent at matched throughput levels. More importantly, by preventing severe throughput degradation under strict interactivity constraints, it enables performance tiers that were previously unattainable, shifting the Pareto frontier of our serving system.

deepseek-ai DeepSeek
·
Jul 5 2

Breaking Diffusion: Parallel Reasoning with Draft Refinement

Drafting an answer allows a reasoning model to reconsider each decision in the context of the others. Yet repeated diffusion denoising does not ensure that individually plausible token updates form a better answer together. We introduce Draft Refinement Language Models (DRLMs), which use a single denoiser to propose parallel revisions and evaluate a candidate draft. We train the denoiser to reconstruct every token from uniformly corrupted drafts, teaching both preservation and repair. Its predictions specify revisions directly, without a diffusion reverse transition. Evaluation requires a different use of these predictions: confidence in an existing token reflects both contextual support and evidence from observing the token itself. Using the known corruption process, we correct for this self-token evidence to estimate how well each token is supported by the prompt and the remaining draft. Aggregating these estimates yields a cavity energy computed in one forward pass, without an additional scoring model. Each round proposes a revision, reads the completed candidate in its revised context, and retains it only if its energy is lower. Across Countdown, Sudoku-Extreme, and Maze-Hard, our method outperforms autoregressive and discrete diffusion baselines. With 6M parameters, DRLM reaches 44.4% on Countdown-5 and 93.9% on Sudoku-Extreme. The results establish complete-draft parallel refinement as an effective alternative to reverse diffusion for complex reasoning.

microsoft Microsoft
·
Oct 18 2

DEdit: Iterative Draft Editing for Speculative Decoding

Speculative decoding accelerates autoregressive LLMs by having a lightweight drafter propose tokens that the target model verifies in parallel. Diffusion-based drafters further reduce drafting latency by proposing multiple tokens at once. However, these tokens are predicted independently, so a single early error causes prefix verification to discard the rest of the draft, even when it contains useful downstream predictions. We introduce DEdit, a diffusion-based drafter that can not only draft by conventional parallel unmasking but also iteratively edit its draft through token-to-token predictions. Through editing, later predictions can serve as bidirectional context for repairing earlier errors and extending the accepted prefix. To teach the model to repair errors while preserving correct predictions, we propose ProposalMix, a training scheme that mixes draft predictions with ground-truth tokens based on first-pass confidence during training. Across seven benchmarks on Qwen3-4B and Qwen3-8B, DEdit achieves the highest macro-average token acceptance and speedup among the evaluated drafters, reaching macro-average speedups of 5.72times and 5.97times over autoregressive generation under greedy decoding, respectively. Further analysis shows that acceptance improves with more editing passes and wider drafting windows, and that ProposalMix halves harmful edits that shorten the accepted prefix. Moreover, restricting the editor to causal attention lowers acceptance, especially on highly predictable outputs, indicating that future context is a key source of these gains.

  • 12 authors
·
Sep 28

Less Experts, Faster Decoding: Cost-Aware Speculative Decoding for Mixture-of-Experts

Sparse Mixture-of-Experts (MoE) models have become an important approach for scaling Large Language Models (LLMs), but their inference efficiency depends strongly on expert activation patterns. Speculative decoding (SD) accelerates autoregressive generation by verifying multiple draft tokens in parallel, yet existing draft selection strategies primarily optimize acceptance likelihood. In large-scale MoE models, however, selecting draft tokens also determines the union of experts activated during verification. We observe that confidence-driven SD can introduce expert scattering: high-probability draft tokens may route to disjoint experts, increasing expert-weight memory traffic and reducing the speedup from speculation. Motivated by this observation, we revisit draft-tree selection under the non-uniform memory-cost structure of MoE inference. We propose EcoSpec, a cost-aware speculative decoding framework that incorporates predicted marginal expert activation cost into draft selection. With a lightweight expert predictor and a dynamic expert buffer, EcoSpec favors draft paths that preserve high acceptance likelihood while reusing experts already covered by the current verification set, without modifying the target-model verification rule. We evaluate EcoSpec on three large-scale MoE models, including DeepSeek-V3.1 (671B), Qwen3-235B-A22B, and GPT-OSS-120B, across reasoning, coding, question-answering, and dialogue benchmarks. EcoSpec consistently reduces active expert footprints and improves end-to-end decoding speed, achieving up to 1.62times speedup. These results show that accounting for expert activation cost is important for efficient speculative decoding in large-scale MoE models.

  • 7 authors
·
Jul 13

TAPS: Task Aware Proposal Distributions for Speculative Sampling

Speculative decoding accelerates autoregressive generation by letting a lightweight draft model propose future tokens that a larger target model then verifies in parallel. In practice, however, draft models are usually trained on broad generic corpora, which leaves it unclear how much speculative decoding quality depends on the draft training distribution. We study this question with lightweight HASS and EAGLE-2 drafters trained on MathInstruct, ShareGPT, and mixed-data variants, evaluated on MT-Bench, GSM8K, MATH-500, and SVAMP. Measured by acceptance length, task-specific training yields clear specialization: MathInstruct-trained drafts are strongest on reasoning benchmarks, while ShareGPT-trained drafts are strongest on MT-Bench. Mixed-data training improves robustness, but larger mixtures do not dominate across decoding temperatures. We also study how to combine specialized drafters at inference time. Naive checkpoint averaging performs poorly, whereas confidence-based routing improves over single-domain drafts and merged-tree verification yields the highest acceptance length overall for both backbones. Finally, confidence is a more useful routing signal than entropy: rejected tokens tend to have higher entropy, but confidence produces much clearer benchmark-level routing decisions. These results show that speculative decoding quality depends not only on draft architecture, but also on the match between draft training data and downstream workload, and that specialized drafters are better combined at inference time than in weight space.

Collaborative Speculative Inference for Efficient LLM Inference Serving

Speculative inference is a promising paradigm employing small speculative models (SSMs) as drafters to generate draft tokens, which are subsequently verified in parallel by the target large language model (LLM). This approach enhances the efficiency of inference serving by reducing LLM inference latency and costs while preserving generation quality. However, existing speculative methods face critical challenges, including inefficient resource utilization and limited draft acceptance, which constrain their scalability and overall effectiveness. To overcome these obstacles, we present CoSine, a novel speculative inference system that decouples sequential speculative decoding from parallel verification, enabling efficient collaboration among multiple nodes. Specifically, CoSine routes inference requests to specialized drafters based on their expertise and incorporates a confidence-based token fusion mechanism to synthesize outputs from cooperating drafters, ensuring high-quality draft generation. Additionally, CoSine dynamically orchestrates the execution of speculative decoding and verification in a pipelined manner, employing batch scheduling to selectively group requests and adaptive speculation control to minimize idle periods. By optimizing parallel workflows through heterogeneous node collaboration, CoSine balances draft generation and verification throughput in real-time, thereby maximizing resource utilization. Experimental results demonstrate that CoSine achieves superior performance compared to state-of-the-art speculative approaches. Notably, with equivalent resource costs, CoSine achieves up to a 23.2% decrease in latency and a 32.5% increase in throughput compared to baseline methods.

  • 6 authors
·
May 14, 2025

CURE: Local Uncertainty Repair for Block-Parallel Speculative Decoding

Speculative decoding mitigates the latency of sequential generation in autoregressive Large Language Models (LLMs) by interleaving draft generation with target verification. However, existing parallel drafting backends often suffer from rapid accuracy degradation over long horizons, leading to high rejection rates during verification and suboptimal wall-clock speedups. We observe that drafting errors are not uniformly distributed but typically stem from localized high-uncertainty tokens that destabilize downstream generation trajectories. Motivated by this token error pattern, we propose CURE, a budget-aware dynamic repair tree designed to repair errors at uncertainty focal points without incurring prohibitive tree-verification overheads. Specifically, our method uses predictive confidence margins to dynamically locate candidate error tokens within a block-parallel draft, expands bounded repair paths only at these fragile nodes, and employs a novel repair resynchronization mechanism to realign draft states post-verification. Evaluations on code-generation benchmarks (HumanEval, MBPP, and LiveCodeBench-lite) and mathematical reasoning benchmark (GSM8K) demonstrate that CURE increases the average accepted length by 4.2-7.5% over parallel baselines without repair, translating to an end-to-end speedup of 2.66-3.49times over target-only decoding. Furthermore, we provide a plug-and-play repair module compatible with standard parallel drafting frameworks. We also characterize the trade-off between draft compute and verification efficiency.

  • 4 authors
·
Jul 31

In Line with Context: Repository-Level Code Generation via Context Inlining

Repository-level code generation has attracted growing attention in recent years. Unlike function-level code generation, it requires the model to understand the entire repository, reasoning over complex dependencies across functions, classes, and modules. However, existing approaches such as retrieval-augmented generation (RAG) or context-based function selection often fall short: they primarily rely on surface-level similarity and struggle to capture the rich dependencies that govern repository-level semantics. In this paper, we introduce InlineCoder, a novel framework for repository-level code generation. InlineCoder enhances the understanding of repository context by inlining the unfinished function into its call graph, thereby reframing the challenging repository understanding as an easier function-level coding task. Given a function signature, InlineCoder first generates a draft completion, termed an anchor, which approximates downstream dependencies and enables perplexity-based confidence estimation. This anchor drives a bidirectional inlining process: (i) Upstream Inlining, which embeds the anchor into its callers to capture diverse usage scenarios; and (ii) Downstream Retrieval, which integrates the anchor's callees into the prompt to provide precise dependency context. The enriched context, combining draft completion with upstream and downstream perspectives, equips the LLM with a comprehensive repository view.

  • 5 authors
·
Jan 1

Boosting Lossless Speculative Decoding via Feature Sampling and Partial Alignment Distillation

Lossless speculative decoding accelerates target large language model (LLM) inference by employing a lightweight draft model for generating tree-structured candidates, which are subsequently verified in parallel by the target LLM. Currently, effective approaches leverage feature-level rather than token-level autoregression within the draft model to facilitate more straightforward predictions and enhanced knowledge distillation. In this paper, we reassess these approaches and propose FSPAD (Feature Sampling and Partial Alignment Distillation for Lossless Speculative Decoding), which introduces two straightforward and effective components within the existing framework to boost lossless speculative decoding. Firstly, FSPAD utilizes token embeddings to sample features of the target LLM in high-dimensional space before feeding them into the draft model, due to the inherent uncertainty of the features preventing the draft model from obtaining the specific token output by the target LLM. Secondly, FSPAD introduces partial alignment distillation to weaken the draft model's connection between features and logits, aiming to reduce the conflict between feature alignment and logit confidence during training. Our experiments include both greedy and non-greedy decoding on the largest and smallest models from the Vicuna and LLaMA3-Instruct series, as well as tasks in multi-turn conversation, translation, summarization, question answering, mathematical reasoning, and retrieval-augmented generation. The results show that FSPAD outperforms the state-of-the-art method across all the aforementioned tasks and target LLMs.

  • 4 authors
·
Aug 28, 2024

Pair-In, Pair-Out: Latent Multi-Token Prediction for Efficient LLMs

Long chain-of-thought reasoning has made autoregressive decoding the dominant inference cost of modern large language models. Existing methods target either the input side (latent compression) or the output side (speculative decoding and multi-token prediction, MTP), but the two lines of work have been pursued independently. Moreover, output-side methods must incur an expensive verifier pass to validate the unreliable draft tokens predicted by MTP. To address these issues, we propose Pair-In, Pair-Out (PIPO), which unifies both sides by viewing a latent compressor and an MTP head as mirror-image operations: the compressor folds two input tokens into one latent representation, while the MTP head unfolds one hidden state into one additional output token. To remove the verifier cost without sacrificing reliability, PIPO trains a lightweight confidence head that decides whether draft tokens should be accepted. We observe that On-Policy Distillation (OPD) naturally matches the rejection-sampling criterion of speculative decoding, so the confidence head can be trained alongside OPD with negligible extra cost. Experiments on AIME 2025, GPQA-Diamond, LiveCodeBench v6, and LongBench v2 with Qwen3.5-4B and 9B backbones show that PIPO improves pass@4 over regular decoding by up to +7.15 points, while delivering up to 2.64times first-token-latency and 2.07times per-token-latency speedups. Project Page: GitHub.com/RedAI-Infra/PIPO.

  • 8 authors
·
May 28

Thinking-in-Bets at Test Time Reduces Sycophantic Revisions in LLM Agents

Language model agents often abandon correct work when a user challenges it, yet simply telling them to stand firm makes them ignore real mistakes. Once an agent reads a complaint, it tends to discount its own earlier checks in order to agree with the user. We introduce Thinking-in-Bets, a training-free method in which an agent writes a short private record of its main claims, the checks supporting them, and its confidence before reading user feedback. When challenged, the agent consults this Claim Checklist to keep verified work intact while investigating uncertain or newly challenged parts. We evaluate five Gemini models (3.5 Flash-Lite, 3.5 Flash, 3.6 Flash, 3.8 Flash, and 4.0 Argon) across eight benchmarks: SWE-Together, SWE-Interact, and DeepSWE for software engineering, Agents' Last Exam for professional reports, Humanity's Last Exam and SycEval for academic reasoning, Vals Finance for financial analysis, and Terminal-Bench for command-line tasks. Recording claims before criticism nearly eliminates false reversals in patch review and protects passing report drafts under mistaken pushback, whereas writing the same record after reading the complaint recovers very little of the gain. In multi-turn coding, pre-reply claim records substantially reduce unnecessary file edits after mistaken complaints, and gating the record so it is written only when the agent is uncertain lowers token overhead while fixing more real bugs than the baseline. Even in non-interactive tasks without user feedback, listing the key claims in a draft and re-checking the weakest one before submission improves both answer accuracy and confidence estimates across all tested models.

google Google
·
Oct 25 2

Reinforcement Learning of Communication in a Mesh of Small Language Models

Language models gain accuracy from more compute at test time, but majority voting over independent samples saturates: as samples grow, the vote converges to the model's most frequent answer. Communication can add what sampling cannot: an agent that solves a problem can pass the key step to the others. We present TalkMesh, a decentralized mesh of small language model agents that learns when and what to communicate. Each agent samples a proposal and scores it with a trained confidence head. The most confident agent broadcasts a hint; agents below a confidence threshold revise, keeping each revision that outscores its proposal. Gossip consensus approximates the vote weighted by confidence without a coordinator. A talk policy, trained with group relative policy optimization on the change in correctness after revision, writes hints and revisions. With three agents, which together generate at most six outputs, the mesh reaches the accuracy of majority voting over 32 samples with each of three models. Trained with at most 8 agents and evaluated with 32, it raises accuracy from 0.568 under self-consistency to 0.705 (Qwen3.5-0.8B, GSM8K) and from 0.492 to 0.722 (SmolLM3-3B, MATH-500). When 4 of 8 agents collude on a wrong answer with fabricated confidence and poisoned hints, majority vote accuracy falls to 0.000 (Qwen3.5-0.8B, GSM8K). A defended mesh, whose agents rescore solutions with their own confidence heads, retains 0.507. Across reasoning, embodied coordination, and traffic signal control, messages improve a decision when the acting agent cannot observe the information it requires and another agent can send it.

  • 1 authors
·
Sep 23

Language Models Prefer What They Know: Relative Confidence Estimation via Confidence Preferences

Language models (LMs) should provide reliable confidence estimates to help users detect mistakes in their outputs and defer to human experts when necessary. Asking a language model to assess its confidence ("Score your confidence from 0-1.") is a natural way of evaluating its uncertainty. However, models struggle to provide absolute assessments of confidence (i.e. judging confidence in answering a question independent of other questions) and the coarse-grained scores they produce are not useful for evaluating the correctness of their answers. We propose relative confidence estimation, where we match up questions against each other and ask the model to make relative judgments of confidence ("Which question are you more confident in answering correctly?"). Treating each question as a "player" in a series of matchups against other questions and the model's preferences as match outcomes, we can use rank aggregation methods like Elo rating and Bradley-Terry to translate the model's confidence preferences into confidence scores. We evaluate relative confidence estimation against absolute confidence estimation and self-consistency confidence methods on five state-of-the-art LMs -- GPT-4, GPT-4o, Gemini 1.5 Pro, Claude 3.5 Sonnet, and Llama 3.1 405B -- across 14 challenging STEM, social science, and commonsense reasoning question answering tasks. Our results demonstrate that relative confidence estimation consistently provides more reliable confidence scores than absolute confidence estimation, with average gains of 3.5% in selective classification AUC over direct absolute confidence estimation methods and 1.7% over self-consistency approaches across all models and datasets.

  • 3 authors
·
Feb 3, 2025 2

Confidence Comes from Experience: Experiential Confidence Estimation from Reasoning to Agents

Reliable confidence estimation is increasingly central to the trustworthy deployment of language models: a calibrated estimate of the probability that an output is correct decides what to ship, what to escalate, and what to retry. Existing confidence estimators, however, share one design premise: they only read the current inference process, either by introspecting on it, scoring its token probabilities, or resampling it. We argue that the current inference is not a sufficient basis for confidence. We propose XConf (eXperiential Confidence): estimating confidence together with the model's accumulated experience. The experience is stored as a record of the model's own graded past episodes, each holding the task, the model's reflection, its stated confidence, the outcome, and a lesson written once the grade arrived. Given a new task, XConf's Recall stage retrieves past episodes on similar tasks met with a similar stated confidence, and reads off their historical success rate; its Reflect stage shows the model this record, has it name its recurring failure mode, and restate a confidence now informed by its own track records. Our estimator is format-general, requiring no logit access or weight updates, and costs only one answer generation. Across nine benchmarks spanning reasoning, coding, multimodal QA, and interactive agents, and four models from three families, XConf beats or matches ten-sample self-consistency in discrimination (AUROC) on 23 of 24 comparisons, with much lower calibration error (ECE), at a tenth of the generation cost. Used for selective prediction, abstaining on the 10% least-confident episodes raises the delivered success rate by up to 8.7 points on agent tasks. We therefore see experiential confidence estimation as a new paradigm for future general-purpose confidence estimation.

Understanding and Mitigating Premature Confidence for Better LLM Reasoning

Long chains of thought (CoT) from current language models frequently contain logical gaps and unjustified leaps, limiting the gains from additional test-time compute. Improving reasoning quality directly would require process reward models, but the step-level annotations needed to train them are expensive and scarce. We find such a signal in how the model's confidence evolves during reasoning: premature confidence, the tendency to commit to an answer early and use the remaining tokens to rationalize it, strongly predicts flawed reasoning across tasks and model scales. We exploit this in progressive confidence shaping, a reinforcement learning objective that trains models to update their confidence as they reason rather than commit early -- rewarding gradual confidence growth and penalizing early commitment, with no external labels or reward models. The method improves accuracy and reasoning quality from 1.5B to 8B parameters across arithmetic (Countdown), math (DAPO, AIME), and science (ScienceQA): on Countdown, accuracy improves 3.2x (+42.0pp) and flawed reasoning drops 48pp; on AIME, Pass@64 improves 6.6pp. Consistent with this mechanism, the method also improves faithfulness: on a safety benchmark, our models more transparently surface misleading content in their reasoning traces rather than concealing it. Controlled experiments reveal that the problem and its remedy scale together: premature confidence grows with model size and task difficulty, and so do the gains from addressing it.

  • 7 authors
·
May 22

Text Speeding Itself Up: Recency and Restraint in Session-Local Drafting

Speculative decoding lets a cheap draft model propose tokens that a large language model verifies in a single forward pass. When the verifier keeps a KV cache, verification is cheap and drafting must be nearly free. Session-local drafters, which predict from the prompt and the text generated so far, meet that bar without training. We compare a recency-weighted, backing-off, confidence-gated session memory against prompt lookup decoding in its reference form, which copies from the earliest earlier match, and in a variant that copies from the most recent one, with paired per-prompt bootstrap intervals throughout. On general, medical, and legal text with a Mistral-7B verifier, recency accounts for the speed: most-recent lookup gains up to 0.09 in speedup over earliest-match lookup on 500-token generations, and session memory's weighting and backoff add nothing measurable on top, at 30 to 40 times the drafting cost. Energy tells a different story. On medical and legal text, unselective drafters are 14% faster than plain decoding yet use as much energy per token, while drafters that abstain on weak evidence save 3 to 4 joules per 100 tokens; a three-token minimum match length on prompt lookup matches the confidence-gated session memory. Outputs are token-identical to greedy decoding in 94% of generations, with every divergence at a numerical near-tie. Under a repetition penalty, long-generation speedups shrink from 1.4-1.7x to 1.1-1.2x, but recency still helps and the length floor is the only drafter that saves energy in both domains.

  • 1 authors
·
Nov 13

Post-Training Shifts Confidence: A Three-Stage Analysis of How SFT, RL, and OPD Shape CoT Calibration

Large language models have made strong reasoning gains through supervised fine-tuning, reinforcement learning, and on-policy distillation, yet these post-training methods are usually evaluated only by final-answer accuracy. We study how they reshape confidence during reasoning. We introduce a three-stage calibration framework that evaluates confidence before, during, and after chain-of-thought generation, corresponding to difficulty estimation, early termination, and answer aggregation. Through a controlled comparison on mathematical reasoning benchmarks, we find that OPD provides the most useful pre-reasoning confidence, SFT gives the strongest online signal for early stopping, and RL produces the most reliable trace-level signal for aggregation. We further show that confidence reliability is position-dependent: RL confidence becomes informative after a path-commitment phase, while OPD confidence is useful early but can become inversely calibrated later. Based on this observation, we propose PosConf, a position-aware confidence strategy that uses confidence only from reliable relative-position intervals. PosConf improves RL answer aggregation by 6.1 points over majority voting and consistently improves OPD early stopping under tight token budgets, with gains up to 4.3 points by avoiding its later inverse-calibration region, showing that confidence in reasoning models should be used both stage-wise and position-awarely. Our code is available at https://github.com/EIT-NLP/Post-Training-Calibration.

  • 6 authors
·
Jul 19

AI World Cup 2026: Benchmarking Large Language Models for End-to-End Football Tournament Prediction

Large language models (LLMs) are now regularly asked to forecast real-world events, but comparisons are often difficult because models receive different information, use different tools, and are evaluated under different rules. This paper reports the completed AI World Cup benchmark, in which ten LLM-based assistants made a single pre-tournament forecast of the entire 2026 FIFA World Cup. Every submission used the same tournament snapshot, prompt, JSON schema, and scoring procedure. The forecasts covered group-stage scores, group rankings, the knockout bracket, final placings, confidence values, and short explanations. After all 104 matches had been played, GPT-5.5 Thinking finished first with 744 points, followed by GPT-5.5 with 717, Gemini with 699, and Qwen 3.7 with 687. GPT-5.5 Thinking was also the only model to select Spain, which defeated Argentina 1--0 in the final, as champion. The final ranking was driven mainly by knockout performance: total score was strongly correlated with knockout points (r=0.986), but showed little relationship with group-stage match points (r=0.055), group-standing points (r=-0.103), or their combined pre-knockout score (r=-0.054). Match-level accuracy produced a different ordering. Claude Sonnet 4.6 correctly predicted the largest number of group-stage outcomes (63.89\%) but placed sixth overall. Average self-reported confidence was also unrelated to either outcome accuracy (r=-0.060) or total score (r=-0.067). The results suggest that forecasting a complete tournament tests something different from predicting matches one at a time, while also showing how strongly a bracket-based leaderboard can depend on scoring design. The benchmark materials, raw responses, and scoring code are released to support replication and future extensions.

  • 2 authors
·
Aug 3

Confidence as a Reward: Transforming LLMs into Reward Models

Reward models can significantly enhance the reasoning capabilities of large language models (LLMs), but they typically require extensive curated data and costly training. To mitigate these challenges, training-free approaches such as LLM-as-a-Judge leverage the intrinsic reasoning abilities of LLMs to evaluate responses, achieving promising results. Recent works have also indicated that model confidence can serve effectively as a reward metric, distinguishing between chain-of-thought (CoT) and non-CoT paths. However, the concept of using confidence as a reward has not been comprehensively studied. In this work, we systematically investigate Confidence-as-a-Reward (CRew), a simple yet powerful training-free method that utilizes token-level confidence in the model's final answers as a proxy for reward, especially suitable for close-ended tasks. Through extensive experiments on mathematical reasoning tasks, we demonstrate that CRew outperforms existing training-free reward approaches on the MATH500 and RewardMATH benchmarks, and even surpasses most trained reward models. We further identify a strong correlation between CRew scores and the actual reasoning performance of the model. Additionally, we find that CRew can effectively filter high-quality training data. Building upon these insights, we propose CRew-DPO, a training strategy that constructs preference data from confidence scores combined with correctness signals. Finetuning with CRew-DPO further enhances the model's judging capabilities and consistently outperforms existing self-training methods.

  • 6 authors
·
Oct 15, 2025

Laya as a Typed Probabilistic Assessor: An Independent Reproduction and a Preregistered Study of Calibration and Selective Escalation

The shipped Laya Typed-Decisions checkpoint, a 421M-parameter ModernBERT-large assessor that answers typed choice/noul/score questions over workflow state, is uniformly under-confident. The signed confidence-accuracy gap is -0.214, every occupied reliability bin's accuracy exceeds its confidence, and that sign uniformity collapses every binned ECE variant to the same value, 0.214. The card frames the risk as over-confidence; the measured direction is the opposite, and the direction decides which way a confidence-gated cascade fails. A single disjointly fitted temperature (T=0.469, sharpening) removes most of the miscalibration (held-out ECE 0.204 to 0.037) and outperforms the shipped per-option-count table. The frozen selection rule instead chose isotonic regression, which overfit and failed its held-out NLL contrast on both tracks, so hypothesis H2 is not supported. Re-running the released checkpoint on its full official test split reproduces the card's headline accuracy (0.767 vs. 0.766). The retrospective E1 reproduction preceded the analysis freeze; E2-E8 were prospectively preregistered, and 20 of 22 executed confirmatory tests reject under Benjamini-Hochberg FDR at q=0.05 (two descoped). The frozen gate beats random escalation but misses its 10% accepted-set error target on both tracks, an exploratory out-of-distribution probe finds no zero-shot transfer (accuracy 0.617), and every score measures agreement with a synthetic teacher whose self-agreement ceiling (0.735) the specialist exceeds. Per-decision predictions, run manifests, and the frozen preregistration are in the ancillary files. The author has no affiliation with the model's publisher, the dataset's publisher, or TypeSafe.

  • 1 authors
·
Sep 26

Mind the Generation Process: Fine-Grained Confidence Estimation During LLM Generation

While large language models (LLMs) have demonstrated remarkable performance across diverse tasks, they fundamentally lack self-awareness and frequently exhibit overconfidence, assigning high confidence scores to incorrect predictions. Accurate confidence estimation is therefore critical for enhancing the trustworthiness and reliability of LLM-generated outputs. However, existing approaches suffer from coarse-grained scoring mechanisms that fail to provide fine-grained, continuous confidence estimates throughout the generation process. To address these limitations, we introduce FineCE, a novel confidence estimation method that delivers accurate, fine-grained confidence scores during text generation. Specifically, we first develop a comprehensive pipeline for constructing training data that effectively captures the underlying probabilistic distribution of LLM responses, and then train a model to predict confidence scores for arbitrary text sequences in a supervised manner. Furthermore, we propose a Backward Confidence Integration (BCI) strategy that leverages information from the subsequent text to enhance confidence estimation for the current sequence during inference. We also introduce three strategies for identifying optimal positions to perform confidence estimation within the generation process. Extensive experiments on multiple benchmark datasets demonstrate that FineCE consistently outperforms existing classical confidence estimation methods. Our code and all baselines used in the paper are available on GitHub.

  • 11 authors
·
Aug 16, 2025 2

The Calibration Gap between Model and Human Confidence in Large Language Models

For large language models (LLMs) to be trusted by humans they need to be well-calibrated in the sense that they can accurately assess and communicate how likely it is that their predictions are correct. Recent work has focused on the quality of internal LLM confidence assessments, but the question remains of how well LLMs can communicate this internal model confidence to human users. This paper explores the disparity between external human confidence in an LLM's responses and the internal confidence of the model. Through experiments involving multiple-choice questions, we systematically examine human users' ability to discern the reliability of LLM outputs. Our study focuses on two key areas: (1) assessing users' perception of true LLM confidence and (2) investigating the impact of tailored explanations on this perception. The research highlights that default explanations from LLMs often lead to user overestimation of both the model's confidence and its' accuracy. By modifying the explanations to more accurately reflect the LLM's internal confidence, we observe a significant shift in user perception, aligning it more closely with the model's actual confidence levels. This adjustment in explanatory approach demonstrates potential for enhancing user trust and accuracy in assessing LLM outputs. The findings underscore the importance of transparent communication of confidence levels in LLMs, particularly in high-stakes applications where understanding the reliability of AI-generated information is essential.

  • 8 authors
·
Jan 24, 2024

BAS: A Decision-Theoretic Approach to Evaluating Large Language Model Confidence

Large language models (LLMs) often produce confident but incorrect answers in settings where abstention would be safer. Standard evaluation protocols, however, require a response and do not account for how confidence should guide decisions under different risk preferences. To address this gap, we introduce the Behavioral Alignment Score (BAS), a decision-theoretic metric for evaluating how well LLM confidence supports abstention-aware decision making. BAS is derived from an explicit answer-or-abstain utility model and aggregates realized utility across a continuum of risk thresholds, yielding a measure of decision-level reliability that depends on both the magnitude and ordering of confidence. We show theoretically that truthful confidence estimates uniquely maximize expected BAS utility, linking calibration to decision-optimal behavior. BAS is related to proper scoring rules such as log loss, but differs structurally: log loss penalizes underconfidence and overconfidence symmetrically, whereas BAS imposes an asymmetric penalty that strongly prioritizes avoiding overconfident errors. Using BAS alongside widely used metrics such as ECE and AURC, we then construct a benchmark of self-reported confidence reliability across multiple LLMs and tasks. Our results reveal substantial variation in decision-useful confidence, and while larger and more accurate models tend to achieve higher BAS, even frontier models remain prone to severe overconfidence. Importantly, models with similar ECE or AURC can exhibit very different BAS due to highly overconfident errors, highlighting limitations of standard metrics. We further show that simple interventions, such as top-k confidence elicitation and post-hoc calibration, can meaningfully improve confidence reliability. Overall, our work provides both a principled metric and a comprehensive benchmark for evaluating LLM confidence reliability.

  • 6 authors
·
Apr 2

Verbal Confidence Saturation in 3-9B Open-Weight Instruction-Tuned LLMs: A Pre-Registered Psychometric Validity Screen

Verbal confidence elicitation is widely used to extract uncertainty estimates from LLMs. We tested whether seven instruction-tuned open-weight models (3-9B parameters, four families) produce verbalised confidence that meets minimal validity criteria for item-level Type-2 discrimination under minimal numeric elicitation with greedy decoding. In a pre-registered study (OSF: osf.io/azbvx), 524 TriviaQA items were administered under numeric (0-100) and categorical (10-class) elicitation to eight models at Q5_K_M quantisation on consumer hardware, yielding 8,384 deterministic trials. A psychometric validity screen was applied to each model-format cell. All seven instruct models were classified Invalid on numeric confidence (H2 confirmed, 7/7 vs. predicted >=4/7), with a mean ceiling rate of 91.7% (H1 confirmed). Categorical elicitation did not rescue validity. Instead, it disrupted task performance in six of seven models, producing accuracy below 5% (H4 not confirmed). Token-level logprobability did not usefully predict verbalised confidence under the observed variance regime (H5 confirmed, mean cross-validated R^2 < 0.01). Within the reasoning-distilled model, reasoning-trace length showed a strong negative partial correlation with confidence (rho = -0.36, p < .001), consistent with the Reasoning Contamination Effect. These results do not imply that internal uncertainty representations are absent. They show that minimal verbal elicitation fails to preserve internal signals at the output interface in this model-size regime. Psychometric screening should precede any downstream use of such signals.

  • 1 authors
·
Apr 23

DraftFM: A FoundationModel for Day-Zero Drafting in Magic: The Gathering

Drafting a new Magic: The Gathering expansion begins before any pick from it has been observed: the complete card list is public, but the draft logs that supervised pick models train on do not yet exist. We study this day-zero regime directly. DraftFM is a discrete-choice policy that scores exactly the cards available in the current pack, conditioned on the drafted pool and the state of the draft. Every card enters as a frozen 775-dimensional function of its public card record, structured features and a fixed text embedding, with no card identities, set identities, or usage statistics anywhere in the model, so an unseen card is scored by the same machinery as a familiar one. A 1.6-million-parameter network fitted on 149 million human picks from 29 expansions predicts held-out picks in three expansions withheld in their entirety, reaching 50.8%, 60.4%, and 56.7% top-1 agreement, where uniform chance at the opening pick is about 7%. Refitted on all 32 observed expansions, the same architecture produced a card ranking for the then-unreleased set The Hobbit, sealed with its complete cryptographic provenance and published roughly 36 hours before the set became draftable on MTG Arena. The sealed ranking agrees with six independent expert reviewers roughly as much as those reviewers agree with one another. Evaluation against realized outcomes is committed to a follow-on note, whatever it shows.

  • 1 authors
·
Aug 19

When Two LLMs Debate, Both Think They'll Win

Can LLMs accurately adjust their confidence when facing opposition? Building on previous studies measuring calibration on static fact-based question-answering tasks, we evaluate Large Language Models (LLMs) in a dynamic, adversarial debate setting, uniquely combining two realistic factors: (a) a multi-turn format requiring models to update beliefs as new information emerges, and (b) a zero-sum structure to control for task-related uncertainty, since mutual high-confidence claims imply systematic overconfidence. We organized 60 three-round policy debates among ten state-of-the-art LLMs, with models privately rating their confidence (0-100) in winning after each round. We observed five concerning patterns: (1) Systematic overconfidence: models began debates with average initial confidence of 72.9% vs. a rational 50% baseline. (2) Confidence escalation: rather than reducing confidence as debates progressed, debaters increased their win probabilities, averaging 83% by the final round. (3) Mutual overestimation: in 61.7% of debates, both sides simultaneously claimed >=75% probability of victory, a logical impossibility. (4) Persistent self-debate bias: models debating identical copies increased confidence from 64.1% to 75.2%; even when explicitly informed their chance of winning was exactly 50%, confidence still rose (from 50.0% to 57.1%). (5) Misaligned private reasoning: models' private scratchpad thoughts sometimes differed from their public confidence ratings, raising concerns about faithfulness of chain-of-thought reasoning. These results suggest LLMs lack the ability to accurately self-assess or update their beliefs in dynamic, multi-turn tasks; a major concern as LLMs are now increasingly deployed without careful review in assistant and agentic roles. Code for our experiments is available at https://github.com/pradyuprasad/llms_overconfidence

  • 2 authors
·
May 25, 2025

Safety-Flag: A Unified Benchmark for the Reliability and Calibration of LLM Content Moderators

Large language models are increasingly used for content moderation, but most evaluations still report aggregate accuracy on individual benchmarks. We introduce Safety-Flag, which places seven widely used safety benchmarks (BeaverTails, XSTest, Ethics, WildGuard, Aegis, ToxiChat, and ToxiGen) into a single balanced flag / do-not-flag protocol. We release item-level decisions and confidence scores for six general-purpose LLMs and four dedicated guards, together with three reference models, evaluated on the same items. Safety-Flag measures three dimensions of moderator reliability: error direction, probability calibration, and confidence-based error ranking for human review. They often disagree. Aggregate accuracy does not reveal error direction: one model flags 85% of benign content, whereas another misses 54% of harmful content. All six general-purpose models are overconfident; fitting one temperature per model reduces calibration error by 2.8--6.0times without changing predicted labels or confidence ordering. Confidence-based abstention lowers selective risk for every model, although the gains depend on how well confidence ranks errors. Dedicated guards produce fewer false alarms and are better calibrated, but several have higher miss rates outside their documented coverage. We release the benchmark, fixed item lists, evaluation code, per-item model outputs, and leaderboard at: https://github.com/yibo-hu-lab/safety-flag-benchmark.

  • 1 authors
·
Aug 5

ConCISE: Confidence-guided Compression in Step-by-step Efficient Reasoning

Large Reasoning Models (LRMs) perform strongly in complex reasoning tasks via Chain-of-Thought (CoT) prompting, but often suffer from verbose outputs caused by redundant content, increasing computational overhead, and degrading user experience. Existing compression methods either operate post-hoc pruning, risking disruption to reasoning coherence, or rely on sampling-based selection, which fails to intervene effectively during generation. In this work, we introduce a confidence-guided perspective to explain the emergence of redundant reflection in LRMs, identifying two key patterns: Confidence Deficit, where the model reconsiders correct steps due to low internal confidence, and Termination Delay, where reasoning continues even after reaching a confident answer. Based on this analysis, we propose ConCISE (Confidence-guided Compression In Step-by-step Efficient Reasoning), a framework that simplifies reasoning chains by reinforcing the model's confidence during inference, thus preventing the generation of redundant reflection steps. It integrates Confidence Injection to stabilize intermediate steps and Early Stopping to terminate reasoning when confidence is sufficient. Extensive experiments demonstrate that fine-tuning LRMs on ConCISE-generated data yields significantly shorter outputs, reducing length by up to approximately 50% under SimPO, while maintaining high task accuracy. ConCISE consistently outperforms existing baselines across multiple reasoning benchmarks.

  • 9 authors
·
May 7, 2025

How LLMs Detect and Correct Their Own Errors: The Role of Internal Confidence Signals

Large language models can detect their own errors and sometimes correct them without external feedback, but the underlying mechanisms remain unknown. We investigate this through the lens of second-order models of confidence from decision neuroscience. In a first-order system, confidence derives from the generation signal itself and is therefore maximal for the chosen response, precluding error detection. Second-order models posit a partially independent evaluative signal that can disagree with the committed response, providing the basis for error detection. Kumaran et al. (2026) showed that LLMs cache a confidence representation at a token immediately following the answer (i.e. post-answer newline: PANL) -- that causally drives verbal confidence and dissociates from log-probabilities. Here we test whether this PANL signal extends beyond confidence to support error detection and self-correction. Here we test whether this signal supports error detection and self-correction, deriving predictions from the second-order framework. Using a verify-then-correct paradigm, we show that: (i) verbal confidence predicts error detection far beyond token log-probabilities, ruling out a first-order account; (ii) PANL activations predict error detection beyond verbal confidence itself; and (iii) PANL predicts which errors the model can correct -- where all behavioural signals fail. Causal interventions confirm that PANL signals rescue error detection behavior when answer information is corrupted. All findings replicate across models (Gemma 3 27B and Qwen 2.5 7B) and tasks (TriviaQA and MNLI). These results reveal that LLMs naturally implement a second-order confidence architecture whose internal evaluative signal encodes not only whether an answer is likely wrong but whether the model has the knowledge to fix it.

  • 5 authors
·
Apr 30

DEER: Draft with Diffusion, Verify with Autoregressive Models

Efficiency, as a critical practical challenge for LLM-driven agentic and reasoning systems, is increasingly constrained by the inherent latency of autoregressive (AR) decoding. Speculative decoding mitigates this cost through a draft-verify scheme, yet existing approaches rely on AR draft models (a.k.a., drafters), which introduce two fundamental issues: (1) step-wise uncertainty accumulation leads to a progressive collapse of trust between the target model and the drafter, and (2) inherently sequential decoding of AR drafters. Together, these factors cause limited speedups. In this paper, we show that a diffusion large language model (dLLM) drafters can naturally overcome these issues through its fundamentally different probabilistic modeling and efficient parallel decoding strategy. Building on this insight, we introduce DEER, an efficient speculative decoding framework that drafts with diffusion and verifies with AR models. To enable high-quality drafting, DEER employs a two-stage training pipeline to align the dLLM-based drafters with the target AR model, and further adopts single-step decoding to generate long draft segments. Experiments show DEER reaches draft acceptance lengths of up to 32 tokens, far surpassing the 10 tokens achieved by EAGLE-3. Moreover, on HumanEval with Qwen3-30B-A3B, DEER attains a 5.54x speedup, while EAGLE-3 achieves only 2.41x. Code, model, demo, etc, will be available at https://czc726.github.io/DEER/

  • 6 authors
·
Dec 17, 2025 2

Intern-Decision: Efficient Multimodal Decision Making with Autoregressive Masked Language Modeling

Interactive agents repeatedly choose among a finite set of actions, labels, or ordinal outcomes. Generating a free-form response for each choice adds latency and complicates the interface between a model and its environment. We present Intern-Decision, a family of 0.8B, 2B, and 4B multimodal decision models that return structured choices and candidate probabilities from text and optional images. Our autoregressive masked language modeling objective places one decision placeholder per field in a complete assistant JSON skeleton. Ground-truth symbols appear only in supervision, while all fields are evaluated in a single causal forward pass using the backbone's native language-model head. The 4B model achieves a 90.02% unweighted average accuracy across seven evaluation suites, compared with 88.74% for Jev v1.13.0. For a fixed 289-token request with three fields on one RTX 4090, mean latency is 44.16 ms for the 4B model and approximately 33--34 ms for the smaller models. On a separate 96-case known-distribution pilot, temperature scaling reduces expected multiclass Brier from 0.628 to 0.550 and expected calibration error from 0.213 to 0.089. A confidence-based handoff study on 111 public Jevbench-Hard items improves accuracy from 82/111 (73.87%) to 97/111 (87.39%) by routing 42 items to Atria-Dawn-Preview. We also describe qualitative game, visual interface, and browser demonstrations. These results support compact decision models as a practical component of larger agent systems.

Can an Agent Learn to Predict Its Own Failure? Outcome-Grounded Confidence Calibration in LLM Agents

Controlling an acting LLM agent means deciding, at each step of a long-horizon task, whether to trust its next action, abstain, or hand off to a human. That decision needs a per-step confidence signal predicting whether the current rollout will eventually succeed. The agent's own self-reported verbalized confidence is the natural candidate, but existing reinforcement learning methods calibrate it against the correctness of a decision at the current step. We propose a method to calibrate it against the eventual outcome of a multi-step episode: under GRPO, the group of rollouts for a task supplies success labels, and a proper scoring rule scores each step's confidence against the realized outcome. In offline RL on recorded trajectories of a Qwen2.5-7B agent in ALFWorld, TextWorld, and WebShop environments, the AUROC of step confidence against episode outcome rises from near chance to 0.68-0.85, and the top-10% of steps the agent is most confident about succeed ~4.3x more often than average. In online RL on the live ALFWorld agent, four calibration rewards improve early-step AUROC, expected calibration error goes from 0.42 to below 0.12, and selective execution improves over both the untrained agent and a format-only RL control, without degrading task success. We also introduce an evaluation protocol that separates episode depth, task difficulty, and attempt-level foresight, which shows where the gain lies: the trained agent recognizes from its first step which tasks it will fail, while telling a succeeding attempt from a failing one at the same task is harder, with some early-window signal emerging on TextWorld.

SAP SAP
·
Oct 12 2

ORCE: Order-Aware Alignment of Verbalized Confidence in Large Language Models

Large language models (LLMs) often produce answers with high certainty even when they are incorrect, making reliable confidence estimation essential for deployment in real-world scenarios. Verbalized confidence, where models explicitly state their confidence in natural language, provides a flexible and user-facing uncertainty signal that can be applied even when token logits are unavailable. However, existing verbalized-confidence methods often optimize answer generation and confidence generation jointly, which can cause confidence-alignment objectives to interfere with answer accuracy. In this work, we propose a decoupled and order-aware framework for verbalized confidence calibration. Our method first generates an answer and then estimates confidence conditioned on the fixed question--answer pair, allowing confidence optimization without directly perturbing the answer-generation process. To align confidence with correctness likelihood, we construct a sampling-based surrogate from multiple model completions and optimize rank-based reinforcement learning objectives that encourage responses with higher estimated correctness likelihood to receive higher verbalized confidence. Experiments on reasoning and knowledge-intensive benchmarks show that our method improves calibration and failure prediction performance while largely preserving answer accuracy. These results demonstrate that verbalized confidence can be more reliably aligned by decoupling confidence estimation from answer generation and optimizing the relative ordering of confidence across responses.

  • 5 authors
·
May 11

Understanding the Impact of Confidence in Retrieval Augmented Generation: A Case Study in the Medical Domain

Retrieval Augmented Generation (RAG) complements the knowledge of Large Language Models (LLMs) by leveraging external information to enhance response accuracy for queries. This approach is widely applied in several fields by taking its advantage of injecting the most up-to-date information, and researchers are focusing on understanding and improving this aspect to unlock the full potential of RAG in such high-stakes applications. However, despite the potential of RAG to address these needs, the mechanisms behind the confidence levels of its outputs remain underexplored, although the confidence of information is very critical in some domains, such as finance, healthcare, and medicine. Our study focuses the impact of RAG on confidence within the medical domain under various configurations and models. We evaluate confidence by treating the model's predicted probability as its output and calculating Expected Calibration Error (ECE) and Adaptive Calibration Error (ACE) scores based on the probabilities and accuracy. In addition, we analyze whether the order of retrieved documents within prompts calibrates the confidence. Our findings reveal large variation in confidence and accuracy depending on the model, settings, and the format of input prompts. These results underscore the necessity of optimizing configurations based on the specific model and conditions.

  • 10 authors
·
Dec 28, 2024

ConfTuner: Training Large Language Models to Express Their Confidence Verbally

Large Language Models (LLMs) are increasingly deployed in high-stakes domains such as science, law, and healthcare, where accurate expressions of uncertainty are essential for reliability and trust. However, current LLMs are often observed to generate incorrect answers with high confidence, a phenomenon known as "overconfidence". Recent efforts have focused on calibrating LLMs' verbalized confidence: i.e., their expressions of confidence in text form, such as "I am 80% confident that...". Existing approaches either rely on prompt engineering or fine-tuning with heuristically generated uncertainty estimates, both of which have limited effectiveness and generalizability. Motivated by the notion of proper scoring rules for calibration in classical machine learning models, we introduce ConfTuner, a simple and efficient fine-tuning method that introduces minimal overhead and does not require ground-truth confidence scores or proxy confidence estimates. ConfTuner relies on a new loss function, tokenized Brier score, which we theoretically prove to be a proper scoring rule, intuitively meaning that it "correctly incentivizes the model to report its true probability of being correct". ConfTuner improves calibration across diverse reasoning tasks and generalizes to black-box models such as GPT-4o. Our results further show that better-calibrated confidence enables downstream gains in self-correction and model cascade, advancing the development of trustworthy LLM systems. The code is available at https://github.com/liushiliushi/ConfTuner.

  • 4 authors
·
Aug 26, 2025

Early Signals, Strong Decisions: Prefix-Guided Sampling for Parallel Test-Time Scaling

Parallel test-time scaling (TTS) has been shown to enhance reasoning in large language models by generating and aggregating multiple independent reasoning paths. Internal confidence scores can further improve this process by identifying paths of varying quality. However, existing methods remain computationally inefficient, as low-quality paths are fully expanded before being evaluated. In this work, we aim to improve the use of internal confidence signals for better model performance and computational efficiency. We begin by offering a new perspective on the role of confidence in aggregation, showing that it is most impactful for questions near the decision boundary. Notably, when amplified by multi-sample aggregation, even small confidence signals derived from short prefixes can meaningfully influence outcomes in these boundary cases. Building on this insight, we introduce Prefix-Guided Sampling (PreG), a method that reallocates computation by first generating short prefixes, ranking them using internal confidence scores, and then completing only the most promising candidates. This strategy reduces token usage while maintaining gains in path quality. We provide theoretical analysis demonstrating that, under a fixed compute budget, PreG strengthens the effective signal by widening the decision boundary margin. Empirically, our method consistently outperforms standard parallel TTS approaches across benchmarks, while significantly improving token efficiency and reducing overall computation.

  • 3 authors
·
Nov 10

Can Large Language Models Express Uncertainty Like Human?

Large language models (LLMs) are increasingly used in high-stakes settings, where overconfident responses can mislead users. Reliable confidence estimation has been shown to enhance trust and task accuracy. Yet existing methods face practical barriers: logits are often hidden, multi-sampling is computationally expensive, and verbalized numerical uncertainty (e.g., giving a 0-100 score) deviates from natural communication. We revisit linguistic confidence (LC), where models express uncertainty through hedging language (e.g., probably, might), offering a lightweight and human-centered alternative. To advance this direction, we (1) release the first diverse, large-scale dataset of hedging expressions with human-annotated confidence scores, and (2) propose a lightweight mapper that converts hedges into confidence scores at near-zero cost. Building on these resources, we (3) conduct the first systematic study of LC across modern LLMs and QA benchmarks, revealing that while most LLMs underperform in expressing reliable LC, carefully designed prompting achieves competitive calibration and discriminability. Finally, we (4) introduce a fine-tuning framework that further improves LC reliability. Taken together, our work positions linguistic confidence as a scalable, efficient, and human-aligned approach to LLM uncertainty estimation, and calls for deeper exploration of this promising yet underexplored direction.

  • 9 authors
·
Sep 28, 2025

Can LLMs Express Their Uncertainty? An Empirical Evaluation of Confidence Elicitation in LLMs

Empowering large language models to accurately express confidence in their answers is essential for trustworthy decision-making. Previous confidence elicitation methods, which primarily rely on white-box access to internal model information or model fine-tuning, have become less suitable for LLMs, especially closed-source commercial APIs. This leads to a growing need to explore the untapped area of black-box approaches for LLM uncertainty estimation. To better break down the problem, we define a systematic framework with three components: prompting strategies for eliciting verbalized confidence, sampling methods for generating multiple responses, and aggregation techniques for computing consistency. We then benchmark these methods on two key tasks-confidence calibration and failure prediction-across five types of datasets (e.g., commonsense and arithmetic reasoning) and five widely-used LLMs including GPT-4 and LLaMA 2 Chat. Our analysis uncovers several key insights: 1) LLMs, when verbalizing their confidence, tend to be overconfident, potentially imitating human patterns of expressing confidence. 2) As model capability scales up, both calibration and failure prediction performance improve. 3) Employing our proposed strategies, such as human-inspired prompts, consistency among multiple responses, and better aggregation strategies can help mitigate this overconfidence from various perspectives. 4) Comparisons with white-box methods indicate that while white-box methods perform better, the gap is narrow, e.g., 0.522 to 0.605 in AUROC. Despite these advancements, none of these techniques consistently outperform others, and all investigated methods struggle in challenging tasks, such as those requiring professional knowledge, indicating significant scope for improvement. We believe this study can serve as a strong baseline and provide insights for eliciting confidence in black-box LLMs.

  • 7 authors
·
Jun 22, 2023

CritiCal: Can Critique Help LLM Uncertainty or Confidence Calibration?

Accurate confidence calibration in Large Language Models (LLMs) is critical for safe use in high-stakes domains, where clear verbalized confidence enhances user trust. Traditional methods that mimic reference confidence expressions often fail to capture the reasoning needed for accurate confidence assessment. We propose natural language critiques as a solution, ideally suited for confidence calibration, as precise gold confidence labels are hard to obtain and often require multiple generations. This paper studies how natural language critiques can enhance verbalized confidence, addressing: (1) What to critique: uncertainty (question-focused) or confidence (answer-specific)? Analysis shows confidence suits multiple-choice tasks, while uncertainty excels in open-ended scenarios. (2) How to critique: self-critique or critique calibration training? We propose Self-Critique, enabling LLMs to critique and optimize their confidence beyond mere accuracy, and CritiCal, a novel Critique Calibration training method that leverages natural language critiques to improve confidence calibration, moving beyond direct numerical optimization. Experiments show that CritiCal significantly outperforms Self-Critique and other competitive baselines, even surpassing its teacher model, GPT-4o, in complex reasoning tasks. CritiCal also shows robust generalization in out-of-distribution settings, advancing LLM's reliability.

  • 10 authors
·
Oct 28, 2025 2

Competence-Gated Pooling of Language Models and Priors for Event Forecasting

In hybrid forecasting, a language model is often one of several available signals. A system may already have a market, crowd, or statistical forecast and must decide whether the model adds useful information or should be ignored. The relevant target is therefore not standalone model accuracy, but relative competence, defined as the model's marginal value beyond the available external forecast. Under Brier loss, we characterize when model disagreement can improve an external forecast and derive the gain from using domain-specific rather than global pooling weights. We then introduce a competence gate that estimates domain-level source weights from resolved outcomes, shrinks uncertain estimates toward a global weight, and recalibrates the pooled forecast. Across 2,357 resolved binary questions and five language models, the gate improves the main external baseline from 0.0771 to 0.0732 Brier and significantly outperforms global forecast combinations. The gain remains significant under leakage controls and against a leakage-safe time-series prior on the pooled structured set, with separate evidence on FRED. In contrast, the gate gives no significant improvement on the official ForecastBench market subset, where it largely defers to the market. Across four Qwen models, verbal confidence does not reliably identify when the model outperforms the external forecast, while outcome-estimated competence supports better abstention decisions. These results provide a practical approach for selective model use based on measured marginal value.

Adversarial Speculative Reasoning Improves Long Horizon Agents

Speculative decoding has been treated purely as a systems optimization that speeds up large language model decoding without changing the model behavior. Under this view, the growing effort to train better draft models has been focused solely on acceptance rate. We argue that this view does not hold true for long-horizon agent reasoning. Measuring frontier open-weight models on complex agentic tasks with different speculative decoding approaches, we found that numerical noise grows within verification windows, and the draft acceptance results of the thinking process can change the output distribution of the model after 30 steps, thus noticeably influencing the reasoning accuracy of long-horizon agents in random directions. In this work, we improve the reasoning capability of target models by controlling such noise. While we cannot change the overall token distribution verified by the target model, we can encode critical reasoning with highest precision by training the draft model to be rejected. We identify these points in agent traces and train the draft model to favor adversarial preference. At inference the trained draft and the target part ways precisely at these decision points, verification restarts, so that critical thinking tokens are sampled from the target model and encoded under its least noisy conditions. This approach makes critical reasoning better indexed and more durable over a long horizon. On complex agentic coding benchmarks, our approach raises end-to-end success rate with no change to the target model or its output distribution. Our results recast the speculative decoding mechanism from a pure accelerator into an active allocator for context precision that improves the accuracy of long-horizon agents by training 0.06% to 0.28% of hosted parameters.

SubconsciousDev Subconscious
·
Nov 2 2

Critic Experience Bank: Self-Evolving Step-Level Confidence Estimation for LLM Agents

LLM agents act in external environments where each action changes the state that later decisions condition on, and where a single wrong step can waste interaction budget or trigger irreversible side effects long before the final failure is observed. Reliable deployment therefore requires step-level confidence estimation: a calibrated probability that each proposed action is productive, available before the action is executed. Existing LLM confidence estimators are designed to score a response from the given prompt, but agent confidence also depends on execution consequences: whether similar actions in similar situations actually advanced the task after the environment responded. We introduce the \method (\methodshort), a self-evolving critic framework in which an LLM critic accumulates evidence from its own past judgments and their observed consequences. After each trajectory, a hindsight LLM that sees the full execution feedback votes on whether each step was productive. The resulting pseudo-labels populate a memory bank from which related productive and unproductive experiences are retrieved into the critic's prompt whenever a similar step recurs. \methodshort requires no training and uses no ground truth step labels. Across three agent benchmarks and three critic backbones, \methodshort attains the best calibration (ECE and Brier) and ranking (AUC) in every dataset--critic combination, reducing ECE by up to 54% relative to the strongest training-free baseline.

  • 6 authors
·
Jul 13

Is Your Paper Being Reviewed by an LLM? Benchmarking AI Text Detection in Peer Review

Peer review is a critical process for ensuring the integrity of published scientific research. Confidence in this process is predicated on the assumption that experts in the relevant domain give careful consideration to the merits of manuscripts which are submitted for publication. With the recent rapid advancements in large language models (LLMs), a new risk to the peer review process is that negligent reviewers will rely on LLMs to perform the often time consuming process of reviewing a paper. However, there is a lack of existing resources for benchmarking the detectability of AI text in the domain of peer review. To address this deficiency, we introduce a comprehensive dataset containing a total of 788,984 AI-written peer reviews paired with corresponding human reviews, covering 8 years of papers submitted to each of two leading AI research conferences (ICLR and NeurIPS). We use this new resource to evaluate the ability of 18 existing AI text detection algorithms to distinguish between peer reviews fully written by humans and different state-of-the-art LLMs. Additionally, we explore a context-aware detection method called Anchor, which leverages manuscript content to detect AI-generated reviews, and analyze the sensitivity of detection models to LLM-assisted editing of human-written text. Our work reveals the difficulty of identifying AI-generated text at the individual peer review level, highlighting the urgent need for new tools and methods to detect this unethical use of generative AI. Our dataset is publicly available at: https://huggingface.co/datasets/IntelLabs/AI-Peer-Review-Detection-Benchmark.

  • 5 authors
·
Feb 26, 2025

Multiple Choice Questions: Reasoning Makes Large Language Models (LLMs) More Self-Confident Even When They Are Wrong

One of the most widely used methods to evaluate LLMs are Multiple Choice Question (MCQ) tests. MCQ benchmarks enable the testing of LLM knowledge on almost any topic at scale as the results can be processed automatically. To help the LLM answer, a few examples called few shots can be included in the prompt. Moreover, the LLM can be asked to answer the question directly with the selected option or to first provide the reasoning and then the selected answer, which is known as chain of thought. In addition to checking whether the selected answer is correct, the evaluation can look at the LLM-estimated probability of its response as an indication of the confidence of the LLM in the response. In this paper, we study how the LLM confidence in its answer depends on whether the model has been asked to answer directly or to provide the reasoning before answering. The results of the evaluation of questions on a wide range of topics in seven different models show that LLMs are more confident in their answers when they provide reasoning before the answer. This occurs regardless of whether the selected answer is correct. Our hypothesis is that this behavior is due to the reasoning that modifies the probability of the selected answer, as the LLM predicts the answer based on the input question and the reasoning that supports the selection made. Therefore, LLM estimated probabilities seem to have intrinsic limitations that should be understood in order to use them in evaluation procedures. Interestingly, the same behavior has been observed in humans, for whom explaining an answer increases confidence in its correctness.

  • 5 authors
·
Jan 16, 2025 2

LLM Doesn't Know What It Doesn't Know: Detecting Epistemic Blind Spots via Cross-Model Attribution Divergence on Clinical Tabular Data

Large language models (LLMs) are increasingly applied to structured clinical data, yet whether they can recognize the limits of their own knowledge on such tasks remains unexplored. We study this question through the lens of cross-model attribution divergence with the goal of reducing epistemic uncertainty for structured tasks, comparing Qwen 2.5 7B and XGBoost on a prediction task via attribution divergence analysis. We report four findings. First, LLM verbalized confidence is epistemically vacuous, it outputs a near-constant (0.856-0.937) regardless of whether accuracy is 49% or 75.3%, tracking prompt format rather than prediction quality. Second, the LLM exhibits an inverse difficulty effect: accuracy drops to 64.8% when XGBoost is 99% correct, but matches XGBoost (73.8% vs. 73.1%) when it is moderately uncertain. Third, few-shot examples and SHAP-derived feature evidence are orthogonal, super-additive interventions: they reduce the Attribution Disagreement Score (ADS) from 1.54 to 0.38 and improve accuracy from 49% to 75.3% without training. Fourth, a cross-model calibrator that determined LLM reliability using attribution divergence signals reduces expected calibration error from 0.254 to 0.080, replacing uninformative verbalized confidence with patient-specific reliability estimates, without accessing model internals or requiring repeated inference. We frame these findings as a cold start problem for LLMs on structured data and outline a path toward genuine epistemic self-awareness.

  • 3 authors
·
Jun 16

Cautious Next Token Prediction

Next token prediction paradigm has been prevailing for autoregressive models in the era of LLMs. The current default sampling choice for popular LLMs is temperature scaling together with nucleus sampling to balance diversity and coherence. Nevertheless, such approach leads to inferior performance in various NLP tasks when the model is not certain about testing questions. To this end, we propose a brand new training-free decoding strategy, dubbed as Cautious Next Token Prediction (CNTP). In the decoding process, if the model has comparatively high prediction entropy at a certain step, we sample multiple trials starting from the step independently and stop when encountering any punctuation. Then we select the trial with the lowest perplexity score viewed as the most probable and reliable trial path given the model's capacity. The trial number is negatively correlated with the prediction confidence, i.e., the less confident the model is, the more trials it should sample. This is consistent with human beings' behaviour: when feeling uncertain or unconfident, one tends to think more creatively, exploring multiple thinking paths, to cautiously select the path one feels most confident about. Extensive experiments on both LLMs and MLLMs show that our proposed CNTP approach outperforms existing standard decoding strategies consistently by a clear margin. Moreover, the integration of CNTP with self consistency can further improve over vanilla self consistency. We believe our proposed CNTP has the potential to become one of the default choices for LLM decoding. Code is available at https://github.com/wyzjack/CNTP.

  • 10 authors
·
Jul 3, 2025

Calibrated Evidence Inference With a Small, Permissively Licensed Open Model

Systematic reviewers who use a model to read randomized trials need each answer and a measure of how far to trust it. If the model is calibrated, so that its stated probabilities match how often it is right, a reviewer can accept its confident answers and check the rest by hand. This paper fine-tunes Qwen3-4B-Base with low-rank adapters and a classification head for evidence inference (Lehman et al., 2019; DeYoung et al., 2020): given a trial's article and a prompt that names an intervention, a comparator and an outcome, classify the result as a significant increase, a significant decrease or no significant difference. The articles of Evidence Inference 2.0 come from the open-access subset of PubMed Central, which includes articles under non-commercial and no-derivatives licenses, so the released model was fine-tuned only on the 1,431 of 2,657 training articles under CC BY, CC0 or the public domain; it is released under the Apache License 2.0 and runs on a laptop. On the test split, its expected calibration error is 0.017 and its log loss is lower than that of Gemma 4 31B-it given the same input zero-shot, meeting criteria registered on the Open Science Framework before testing. Its macro-F1, 0.925, is above every published result on that split that I found, though those systems used other inputs, scoring rules and prompt filters, and the test labels are public. Accepting its 80 percent most confident answers leaves an error rate of 2.6 percent among them. Context ablations show that the answers depend on the article, but the title alone carries some signal, which an informative title or recall of the trial could explain.

  • 1 authors
·
Oct 4

AI, Take the Wheel: What Drives Delegation and Trust in Human-Computer Cooperative Question Answering?

AI systems are fallible, and humans can make mistakes in deciding whether to trust AI over their own judgment. Thus, improving human-AI collaboration requires understanding when, why, and how humans decide to rely on AI. We study two distinct reliance decisions: the delegation choice -- deciding when to let AI act autonomously without knowing its output, and the adoption choice -- evaluating AI suggestions and deciding how to use them. Both of these decoupled reliance patterns shape collaboration, but prior work rarely studies them together in realistic settings with the same users. We address this gap by studying collaborative human--AI teams competing in a question-answering game in which humans can choose when and how to work with AI agents to win. Our 24 matches pair 23 expert humans with 16 AI agents, capturing 387 delegation and 1440 adoption decisions. While human--AI collaboration performs better than either AI or humans alone, humans make suboptimal collaboration decisions, both under-relying on correct AI suggestions (3.9% of opportunities missed) and over-relying when AI misleads them (1.7%). Both parties contribute wrong answers: reported model confidence is near chance when humans and AI disagree, while confirmation bias drives higher under-reliance (64.5%) when an AI suggestion agrees with humans' initial incorrect answer. To close this gap, we recommend calibrated confidence, evidence-grounded explanations, and mechanisms that help users refine trust.

qanta-challenge QANTA
·
May 26 2

DLoop: Looped Speculative Decoding

Speculative decoding accelerates autoregressive generation in large language models. In each drafting stage, a lightweight draft model proposes tokens that the target model subsequently verifies. With increasingly capable draft models, we find that the target model frequently accepts all tokens produced in a drafting stage. A verification nevertheless follows each drafting stage, resulting in unnecessary target-model forward passes even when drafting could have continued. Adaptive draft length methods decide during decoding how many draft tokens precede a verification, but they raise the speedup only for autoregressive draft models. For a parallel draft model, drafting further requires target-model hidden states for draft tokens that have not been verified. We propose DLoop, a looped form of speculative decoding that adaptively performs multiple drafting stages before verification. DLoop continues drafting while the draft model remains confident and verifies all accumulated draft tokens together. Loop-aware training keeps the draft model reliable in the additional drafting stages by exposing it to its own hidden states for unverified draft tokens. By spending additional draft-model forward passes, DLoop reduces the number of target-model forward passes required for verification. Across diverse speculative decoding methods including EAGLE-3, DFlash, Domino, DSpark, and multi-token prediction modules, DLoop improves the wall-clock speedup by 5 to 41 percent while preserving lossless decoding. Code will be available at https://github.com/naver-ai/DLoop.

naver-ai NAVER AI Lab
·
Oct 5 2

Fact-Checking with Large Language Models via Probabilistic Certainty and Consistency

Large language models (LLMs) are increasingly used in applications requiring factual accuracy, yet their outputs often contain hallucinated responses. While fact-checking can mitigate these errors, existing methods typically retrieve external evidence indiscriminately, overlooking the model's internal knowledge and potentially introducing irrelevant noise. Moreover, current systems lack targeted mechanisms to resolve specific uncertainties in the model's reasoning. Inspired by how humans fact-check, we argue that LLMs should adaptively decide whether to rely on internal knowledge or initiate retrieval based on their confidence in a given claim. We introduce Probabilistic Certainty and Consistency (PCC), a framework that estimates factual confidence by jointly modeling an LLM's probabilistic certainty and reasoning consistency. These confidence signals enable an adaptive verification strategy: the model answers directly when confident, triggers targeted retrieval when uncertain or inconsistent, and escalates to deep search when ambiguity is high. Our confidence-guided routing mechanism ensures that retrieval is invoked only when necessary, improving both efficiency and reliability. Extensive experiments across three challenging benchmarks show that PCC achieves better uncertainty quantification than verbalized confidence and consistently outperforms strong LLM-based fact-checking baselines. Furthermore, we demonstrate that PCC generalizes well across various LLMs.

  • 5 authors
·
Jan 5

SaySelf: Teaching LLMs to Express Confidence with Self-Reflective Rationales

Large language models (LLMs) often generate inaccurate or fabricated information and generally fail to indicate their confidence, which limits their broader applications. Previous work elicits confidence from LLMs by direct or self-consistency prompting, or constructing specific datasets for supervised finetuning. The prompting-based approaches have inferior performance, and the training-based approaches are limited to binary or inaccurate group-level confidence estimates. In this work, we present the advanced SaySelf, a training framework that teaches LLMs to express more accurate fine-grained confidence estimates. In addition, beyond the confidence scores, SaySelf initiates the process of directing LLMs to produce self-reflective rationales that clearly identify gaps in their parametric knowledge and explain their uncertainty. This is achieved by using an LLM to automatically summarize the uncertainties in specific knowledge via natural language. The summarization is based on the analysis of the inconsistency in multiple sampled reasoning chains, and the resulting data is utilized for supervised fine-tuning. Moreover, we utilize reinforcement learning with a meticulously crafted reward function to calibrate the confidence estimates, motivating LLMs to deliver accurate, high-confidence predictions and to penalize overconfidence in erroneous outputs. Experimental results in both in-distribution and out-of-distribution datasets demonstrate the effectiveness of SaySelf in reducing the confidence calibration error and maintaining the task performance. We show that the generated self-reflective rationales are reasonable and can further contribute to the calibration. The code is made public at https://github.com/xu1868/SaySelf.

  • 7 authors
·
May 31, 2024

BITEM at the NTCIR-19 R2C2 Task: Predicting Confidence from Agentic RAG Pipeline Signals

The BITEM team entered both subtasks of the NTCIR-19 R2C2 task with a single agentic pipeline, in which a model searches, reads and records evidence over a movie corpus while an orchestrator holds the record and rules on what may be submitted. A claim is admitted only once an entailment cascade has checked it against the passage it cites, and an answer is released only once enough checked evidence stands behind it. Each question is run three or four times, every pass retrieving from a corpus stripped of what the earlier passes have already seen. The confidence filed with each answer is computed by the orchestrator from what the run leaves behind and is never asked of the model, which is offered no way to rate itself. The two retrieval runs placed 4th and 5th of 22, pooling the passes was worth 0.0709 nDCG@20, and the gain was largest on the multi-hop and post-processing-heavy questions, where the organisers rank the pooled run top of the field. Sixteen of the 25 answer runs were built on passages these two runs supplied, 12 of them filed by other teams. HMR rewards a system whose confidence is high where it answers right and low where it answers wrong. The pipeline reached an accuracy of 0.9219, 6th of 25, while the confidence filed with those answers gave an HMR of 0.4915, 13th. A few rules crafted over those same recorded signals, with no further model call and no further retrieval, raise that to an accuracy of 0.9375, 5th, and an HMR of 0.6985, 9th. Ranking on HMR alone can reward a system for answering wrongly with low confidence, so we propose accHMR, the accuracy multiplied by HMR, which reports the reward in proportion to the accuracy, and on which the revised rules would have scored 0.6549, 5th. For future work, fitting a model on the numbers the pipeline already produces, rather than writing such rules by hand, would be a real step forward.

  • 6 authors
·
Sep 28

DraftRec: Personalized Draft Recommendation for Winning in Multi-Player Online Battle Arena Games

This paper presents a personalized character recommendation system for Multiplayer Online Battle Arena (MOBA) games which are considered as one of the most popular online video game genres around the world. When playing MOBA games, players go through a draft stage, where they alternately select a virtual character to play. When drafting, players select characters by not only considering their character preferences, but also the synergy and competence of their team's character combination. However, the complexity of drafting induces difficulties for beginners to choose the appropriate characters based on the characters of their team while considering their own champion preferences. To alleviate this problem, we propose DraftRec, a novel hierarchical model which recommends characters by considering each player's champion preferences and the interaction between the players. DraftRec consists of two networks: the player network and the match network. The player network captures the individual player's champion preference, and the match network integrates the complex relationship between the players and their respective champions. We train and evaluate our model from a manually collected 280,000 matches of League of Legends and a publicly available 50,000 matches of Dota2. Empirically, our method achieved state-of-the-art performance in character recommendation and match outcome prediction task. Furthermore, a comprehensive user survey confirms that DraftRec provides convincing and satisfying recommendations. Our code and dataset are available at https://github.com/dojeon-ai/DraftRec.

  • 5 authors
·
Apr 27, 2022

Weak-to-Strong Elicitation via Mismatched Wrong Drafts

We consider whether off-policy experience from a smaller, weaker model can elicit capability in a stronger learner that on-policy RL fine-tuning (e.g., GRPO) does not reach. We find that injecting mathematically wrong drafts from a smaller but more domain-trained model -- mismatched to the current problem -- into a stronger learner's GRPO context consistently outperforms standard on-policy GRPO on held-out MATH-500 and out-of-distribution AIME 2025/2026. Concretely, we use Mathstral-7B as the learner, Qwen2.5-Math-1.5B as the draft model, 8.8K Level 3--5 MATH problems (with MATH-500 held out), and train with Dr. GRPO. Mismatch is an active ingredient: shuffling drafts to mismatched problems while holding everything else constant yields +1.62pp on MATH-500 (greedy pass@1) over the matched-wrong variant (n=10 seeds, p=0.0015, Welch's t). In fact, the mismatched-wrong variant leads all other variants we tested on MATH-500 across both greedy pass@1 and sampling pass@k. On out-of-distribution AIME 2025 and 2026, the mismatched-wrong variant uniquely lifts pass@k above both Mathstral-7B (in its native [INST] format) and the Qwen2.5-Math-1.5B draft model at every sample budget from k=1 to k=1024 across 2 seeds (+14.2pp on 2025 and +9.0pp on 2026 at pass@1024 over Mathstral-7B), and at pass@1024 also leads no-draft, matched-wrong, and mismatched-correct variants on both years. All variants use the same prompt with no draft injection at test time. The recipe -- trained on a single GPU with no SFT, no reward models, no synthesized data, and no produce-critique-revise inner loop -- reaches 71.98% MATH-500 on Mathstral-7B-v0.1, the highest published result on this model to our knowledge, surpassing the heavier WizardMath pipeline at 70.9% on full MATH (SFT + PPO with process/instruction reward models).

  • 1 authors
·
May 16

On the Pitfalls of Verbalized Confidence Priors for Calibrating Large Reasoning Models

Large reasoning models (LRMs) often suffer from overconfidence when expressing their uncertainty. Confidence-aware reinforcement learning (RL) offers a promising way to optimize calibration. However, it relies on on-policy rollouts and is thus constrained by the model's pre-RL confidence distribution, which we term confidence prior. In this work, we reveal that off-the-shelf LRMs exhibit a confidence prior heavily concentrated on a few high values, which persists throughout RL. Theoretically, we prove that this concentration suppresses policy gradient updates for rarely sampled confidence values and inflates the lower bound on expected Brier risk. To overcome this exploration bottleneck, we propose CalibSFT, a plug-and-play supervised fine-tuning stage that shapes a calibrated confidence prior with broad support before RL. For each question, CalibSFT constructs confidence targets combining its success rate with response-level correctness, which provably preserves proper-scoring optimality, and then balances training responses across the confidence spectrum to enable diverse confidence exploration during RL. To learn from incorrect responses without imitating their reasoning, CalibSFT introduces correctness-conditional supervision, guiding confidence across all responses while supervising reasoning only on correct ones. Across 16 mathematical and general reasoning benchmarks, incorporating CalibSFT reduces calibration errors and improves discrimination across five representative RL algorithms while preserving comparable accuracy. Furthermore, CalibSFT delivers practical benefits for downstream selective prediction and model routing. Our code is available at https://github.com/ml-stat-Sustech/verbalized-confidence-training.

  • 8 authors
·
Sep 25

Carryover Drafting: Recycling Rejected States for Speculative Decoding

Speculative decoding accelerates LLM inference by verifying multiple drafted tokens in parallel, allowing a single target forward pass to accept several tokens. By construction, verification computes representations for both accepted and rejected tokens. Yet, conventional drafters retain only the representations of accepted tokens, leaving the substantial verifier computation spent on rejected tokens effectively wasted. We find that these discarded hidden states generated during target forward retain useful information about future tokens that can improve subsequent drafts. However, realizing this opportunity poses two distinct challenges. At inference, recycling overhead can increase drafting latency, diminishing the speedup gained from increased acceptance length. During training, standard parallel drafter training does not produce inference-aligned rejected states, while obtaining them through sequential rollouts would sacrifice parallelism across training positions. We introduce Carryover Drafting, which addresses both challenges. Carryover recycles rejected target hidden states as temporary KV context, allowing the drafter to selectively attend to them. It reuses the drafter's existing interface and adds only a single learned embedding to distinguish rejected states from committed context. The additional KV context is replaced each drafting round, keeping its length bounded by one proposal block. We introduce parallel draft--verify--draft training that exposes the drafter to inference-aligned rejected states while preserving parallelism across training positions. Experiments with DFlash and a DSpark-derived semi-autoregressive drafter across two target models show that this simple Carryover mechanism improves average acceptance length by 6.5--14.7% and end-to-end vLLM speedup by 7.9--14.4% over the corresponding baselines, with speedup gains reaching 28.8% on translation.

  • 7 authors
·
Sep 12

MARGIN: Runtime Confidence Calibration for Multi-Agent Foundation Model Coordination

When a coordinator compares answers from heterogeneous foundation models, self-reported confidence may have different meanings across responders and changing workloads. This paper presents MARGIN (Multi-Agent Runtime Grading via Incremental Normalisation), a runtime calibration method that learns model-specific confidence corrections from observed answer outcomes without retraining the models or requiring a held-out calibration set. MARGIN tracks recent accuracy and stated confidence within confidence bands, uses their ratio to correct reported confidence, and blends sparse-band corrections toward a model-level estimate. The corrected scores weight candidate answers in a collective decision. Evaluation covers code generation, question answering, and mathematics, using an 18-model pool and a nine-model subset for distribution-shift experiments. On BigCodeBench, model-mean confidence is negatively related to accuracy; among correct/incorrect response pairs, choosing the more confident responder performs below chance. Against five online calibration baselines receiving identical feedback and retaining their learned state across each transition, MARGIN achieves lower post-shift expected calibration error than all five in two code-generation transitions and than four in a question-answering transition; the remaining question-answering comparison is inconclusive. In separate code-generation coordination experiments, calibration improves the ranking of correct responses and increases answer-selection accuracy by 4.3 and 14.0 percentage points on two of three benchmarks relative to uncalibrated confidence weighting. These results support model-specific runtime calibration for coordination under changing workloads when correctness feedback is available for the participating responders.

EricssonAB Ericsson AB
·
Oct 7 2

Reinforcement Learning with Metacognitive Feedback Elicits Faithful Uncertainty Expression in LLMs

Metacognition is a critical component of intelligence that describes the ability to monitor and regulate one's own cognitive processes. Yet LLMs exhibit systemic deficiencies in key metacognitive faculties: they hallucinate with high confidence, fail to recognize knowledge boundaries, and misrepresent their internal uncertainty--undermining trustworthiness and reliability. Since monitoring task performance and adapting behavior accordingly are central to metacognition, we posit that models capable of accurately judging their own performance are better positioned to improve it. We operationalize this idea via two novel mechanisms: reinforcement learning with metacognitive feedback (RLMF), a paradigm to refine completion rankings during preference optimization based on the quality of a model's self-judgments of performance, and metacognitive data selection, which uses similar self-judgments to identify high-value training examples, outperforming naive active learning. We apply these innovations to the problem of faithful calibration (FC), a task that is itself fundamentally metacognitive: the goal is to align expressed with intrinsic uncertainty, difficult even for frontier LLMs. We adopt a two-stage, decoupled approach, first using these methods to calibrate the faithfulness of models' self-reported confidence scores, then mapping to natural, context-adaptable linguistic uncertainty via targeted output editing. Extensive experiments show RLMF achieves generalizable, state-of-the-art FC on diverse tasks while preserving accuracy. Further, RLMF surpasses standard RL by up to 63% while enhancing models' ability to assess and express their own capability limits. This positions RLMF as a promising paradigm to enhance LLM metacognition toward improved abilities and alignment, and suggests metacognitive performance as an effective RL signal to overcome limits of prior intrinsic feedback methods.

google Google
·
Jun 29 2