Daily Papers

Subword segmentation is widely used to address the open vocabulary problem in machine translation. The dominant approach to subword segmentation is Byte Pair Encoding (BPE), which keeps the most frequent words intact while splitting the rare ones into multiple tokens. While multiple segmentations are possible even with the same vocabulary, BPE splits words into unique sequences; this may prevent a model from better learning the compositionality of words and being robust to segmentation errors. So far, the only way to overcome this BPE imperfection, its deterministic nature, was to create another subword segmentation algorithm (Kudo, 2018). In contrast, we show that BPE itself incorporates the ability to produce multiple segmentations of the same word. We introduce BPE-dropout - simple and effective subword regularization method based on and compatible with conventional BPE. It stochastically corrupts the segmentation procedure of BPE, which leads to producing multiple segmentations within the same fixed BPE framework. Using BPE-dropout during training and the standard BPE during inference improves translation quality up to 3 BLEU compared to BPE and up to 0.9 BLEU compared to the previous subword regularization.

Subword regularization methods such as BPE dropout are typically applied only during fine-tuning, while pretraining is usually done with deterministic tokenization. This creates a potential segmentation mismatch between pretraining and fine-tuning. We investigate whether applying BPE dropout during pretraining improves downstream performance in low-resource NLP. We train monolingual and bilingual BERT models on downsampled subsets of English, German, French, Spanish, Kiswahili, and isiXhosa, and evaluate them on XNLI, PAWS-X, PAN-X, and MasakhaNER 2.0. Across tasks, the best results are typically obtained when stochastic tokenization is applied during both pretraining and fine-tuning, whereas applying BPE dropout only during fine-tuning can underperform deterministic tokenization in smaller-data settings. This disadvantage diminishes as fine-tuning data increases, while the benefits of pretraining-time BPE dropout are largest when either pretraining or fine-tuning data is scarce. The benefits of BPE dropout are often attributed to better compositional representations, especially for rare words. To examine this, we measure morphological boundary alignment under BPE dropout and find only modest improvements in expected alignment, while better-aligned segmentations remain rare. This suggests that fine-tuning alone may provide limited exposure to such segmentations, whereas stochastic tokenization during pretraining exposes the model to them more consistently. We further show that selectively introducing morphologically aligned segmentations during fine-tuning improves performance mainly for models pretrained without BPE dropout. Overall, these findings suggest that exposure to better-aligned segmentations may contribute to the downstream benefits of applying BPE dropout during pretraining.

Language models typically tokenize raw text into sequences of subword identifiers from a predefined vocabulary, a process inherently sensitive to typographical errors, length variations, and largely oblivious to the internal structure of tokens-issues we term the curse of tokenization. In this study, we delve into these drawbacks and demonstrate that large language models (LLMs) remain susceptible to these problems. This study systematically investigates these challenges and their impact on LLMs through three critical research questions: (1) complex problem solving, (2) token structure probing, and (3) resilience to typographical variation. Our findings reveal that scaling model parameters can mitigate the issue of tokenization; however, LLMs still suffer from biases induced by typos and other text format variations. Our experiments show that subword regularization such as BPE-dropout can mitigate this issue. We will release our code and data to facilitate further research.

We present Sailor, a family of open language models ranging from 0.5B to 7B parameters, tailored for South-East Asian (SEA) languages. These models are continually pre-trained from Qwen1.5, a great language model for multilingual use cases. From Qwen1.5, Sailor models accept 200B to 400B tokens, primarily covering the languages of English, Chinese, Vietnamese, Thai, Indonesian, Malay, and Lao. The training leverages several techniques, including BPE dropout for improving the model robustness, aggressive data cleaning and deduplication, and small proxy models to optimize data mixture. Experimental results on four typical tasks indicate that Sailor models demonstrate strong performance across different benchmarks, including commonsense reasoning, question answering, reading comprehension and examination. Embracing the open-source spirit, we share our insights through this report to spark a wider interest in developing large language models for multilingual use cases.

BERT-based models are currently used for solving nearly all Natural Language Processing (NLP) tasks and most often achieve state-of-the-art results. Therefore, the NLP community conducts extensive research on understanding these models, but above all on designing effective and efficient training procedures. Several ablation studies investigating how to train BERT-like models have been carried out, but the vast majority of them concerned only the English language. A training procedure designed for English does not have to be universal and applicable to other especially typologically different languages. Therefore, this paper presents the first ablation study focused on Polish, which, unlike the isolating English language, is a fusional language. We design and thoroughly evaluate a pretraining procedure of transferring knowledge from multilingual to monolingual BERT-based models. In addition to multilingual model initialization, other factors that possibly influence pretraining are also explored, i.e. training objective, corpus size, BPE-Dropout, and pretraining length. Based on the proposed procedure, a Polish BERT-based language model -- HerBERT -- is trained. This model achieves state-of-the-art results on multiple downstream tasks.

Statistical language models on source code have successfully assisted software engineering tasks. However, developers can create or pick arbitrary identifiers when writing source code. Freely chosen identifiers lead to the notorious out-of-vocabulary (OOV) problem that negatively affects model performance. Recently, Karampatsis et al. showed that using the Byte Pair Encoding (BPE) algorithm to address the OOV problem can improve the language models' predictive performance on source code. However, a drawback of BPE is that it cannot split the identifiers in a way that preserves the meaningful semantics. Prior researchers also show that splitting compound identifiers into sub-words that reflect the semantics can benefit software development tools. These two facts motivate us to explore whether identifier splitting techniques can be utilized to augment the BPE algorithm and boost the performance of open-vocabulary language models considered in Karampatsis et al.'s work. This paper proposes to split identifiers in both constructing vocabulary and processing model inputs procedures, thus exploiting three different settings of applying identifier splitting to language models for the code completion task. We contrast models' performance under these settings and find that simply inserting identifier splitting into the pipeline hurts the model performance, while a hybrid strategy combining identifier splitting and the BPE algorithm can outperform the original open-vocabulary models on predicting identifiers by 3.68% of recall and 6.32% of Mean Reciprocal Rank. The results also show that the hybrid strategy can improve the entropy of language models by 2.02%.

Byte-Pair Encoding (BPE) is a popular algorithm used for tokenizing data in NLP, despite being devised initially as a compression method. BPE appears to be a greedy algorithm at face value, but the underlying optimization problem that BPE seeks to solve has not yet been laid down. We formalize BPE as a combinatorial optimization problem. Via submodular functions, we prove that the iterative greedy version is a 1{{sigma(mu^star)}}(1-e^{-{sigma(mu^star)}})-approximation of an optimal merge sequence, where {sigma(mu^star)} is the total backward curvature with respect to the optimal merge sequence mu^star. Empirically the lower bound of the approximation is approx 0.37. We provide a faster implementation of BPE which improves the runtime complexity from Oleft(N Mright) to Oleft(N log Mright), where N is the sequence length and M is the merge count. Finally, we optimize the brute-force algorithm for optimal BPE using memoization.

Standard Byte-Pair Encoding (BPE) tokenization compresses text by pairing a learned token vocabulary with a detailed merge list. Recent work has shown that this merge list exposes a potential attack surface for extracting information about language model's training data. In this paper, we explore the downstream impact of BPE inference algorithms that do not rely on this merge list at all, and hence differ from the encoding process during BPE training. To address this question, we investigate two broad classes of BPE inference schemes that differ from BPE application during training: a) targeted deviation from merge-lists including random merge orders, and various corruptions of merge list involving deletion/truncation, and b) non-targeted BPE inference algorithms that do not depend on the merge list but focus on compressing the text either greedily or exactly. Extensive experiments across diverse language modeling tasks like accuracy-based QA benchmarks, machine translation, and open-ended generation reveal that while targeted deviation from the merge lists exhibits significant degradation in language model performance, the non-targeted merge-list-free inference algorithms result in minimal impact on downstream performance that is often much smaller than expected. These findings pave way for simpler and potentially more privacy-preserving tokenization schemes that do not catastrophically compromise model performance.

Language models can largely benefit from efficient tokenization. However, they still mostly utilize the classical BPE algorithm, a simple and reliable method. This has been shown to cause such issues as under-trained tokens and sub-optimal compression that may affect the downstream performance. We introduce Picky BPE, a modified BPE algorithm that carries out vocabulary refinement during tokenizer training. Our method improves vocabulary efficiency, eliminates under-trained tokens, and does not compromise text compression. Our experiments show that our method does not reduce the downstream performance, and in several cases improves it.

Tokenization plays a pivotal role in natural language processing (NLP), shaping how text is segmented and interpreted by language models. While subword methods such as Byte Pair Encoding (BPE) and WordPiece have been effective, they often struggle with morphologically rich and agglutinative languages because they rely on frequency rather than linguistic structure. We introduce a hybrid tokenization framework that combines rule-based morphological analysis with statistical subword segmentation. The method uses phonological normalization, root-affix dictionaries, and a novel algorithm that balances morpheme preservation with vocabulary efficiency. It assigns shared identifiers to phonologically variant affixes (e.g., -ler and -lar) and altered root forms (e.g., kitap vs. kitab{\i}), reducing redundancy while maintaining semantic integrity. Special tokens are added for whitespace and case, including an UPPERCASE marker to avoid vocabulary inflation from capitalization. BPE is integrated for out-of-vocabulary coverage without harming morphological coherence. On the TR-MMLU benchmark, the tokenizer achieves the highest Turkish Token Percentage (90.29\%) and Pure Token Percentage (85.8\%). Comparisons with tokenizers from LLaMA, Gemma, and GPT show more linguistically meaningful and coherent tokens. Although demonstrated on Turkish, the approach is language-independent and adaptable to other languages, offering a practical path toward more interpretable and effective multilingual NLP systems.

Byte Pair Encoding (BPE) is a widely used tokenization algorithm, whose tokens cannot extend across pre-tokenization boundaries, functionally limiting it to representing at most full words. The BoundlessBPE and SuperBPE algorithms extend and improve BPE by relaxing this limitation and allowing the formation of superwords, which are combinations of pretokens that form phrases. However, previous implementations were impractical to train: for example, BoundlessBPE took 4.7 CPU days to train on 1GB of data. We show that supermerge candidates, two or more consecutive pretokens eligible to form a supermerge, can be aggregated by frequency much like regular pretokens. This avoids keeping full documents in memory, as the original implementations of BoundlessBPE and SuperBPE required, leading to a significant training speedup. We present a two-phase formulation of BoundlessBPE that separates first-phase learning of regular merges from second-phase learning of supermerges, producing identical results to the original implementation. We also show a near-equivalence between two-phase BoundlessBPE and SuperBPE, with the difference being that a manually selected hyperparameter used in SuperBPE can be automatically determined in the second phase of BoundlessBPE. These changes enable a much faster implementation, allowing training on that same 1GB of data in 603 and 593 seconds for BoundlessBPE and SuperBPE, respectively, a more than 600x increase in speed. For each of BoundlessBPE, SuperBPE, and BPE, we open-source both a reference Python implementation and a fast Rust implementation.

In this paper, we aim to do code completion based on implementing a Neural Network from Li et. al.. Our contribution is that we use an encoding that is in-between character and word encoding called Byte Pair Encoding (BPE). We use this on the source code files treating them as natural text without first going through the abstract syntax tree (AST). We have implemented two models: an attention-enhanced LSTM and a pointer network, where the pointer network was originally introduced to solve out of vocabulary problems. We are interested to see if BPE can replace the need for the pointer network for code completion.

Large language models are trained to predict the next token, not to act inside a specific API. In niche enterprise SaaS workflows -- where success means hitting the right endpoint with the right nested arguments in the right order -- this objective mismatch shows up as silent failures: dropped required fields, hallucinated tools, or early stops after a single read. We ask whether Reinforcement Learning with Verifiable Rewards (RLVR), applied directly in the target environment, closes the gap. As a proof of concept we build a suite of five synthetic environments emulating the Jira REST v3 and Confluence v2 APIs at schema fidelity; rewards are computed entirely from the tool-call trace, with no live API, no learned judge, and no human label in the loop. Scoring prompted Qwen3-1.7B and Qwen3.5-4B on the same checkers that drive GRPO training, we find that on the four scenarios whose rewards are non-degenerate the RL-trained policy lifts average reward from a 4B-baseline range of 0.35--0.92 to 0.95--1.00, with the largest single gain on Confluence page creation (0.35 rightarrow 1.00). We position this as a preliminary step toward outcome-optimised small models for niche enterprise APIs, and foreground two limitations a workshop reader should weigh: hand-crafting verifiable rewards does not scale beyond the handful of endpoints reported here, and one of our five scenarios (ticket-transition) has a saturating reward shape that the prompted 4B already maxes out.

Byte-pair encoding (BPE) is a ubiquitous algorithm in the subword tokenization process of language models as it provides multiple benefits. However, this process is solely based on pre-training data statistics, making it hard for the tokenizer to handle infrequent spellings. On the other hand, though robust to misspellings, pure character-level models often lead to unreasonably long sequences and make it harder for the model to learn meaningful words. To alleviate these challenges, we propose a character-based subword module (char2subword) that learns the subword embedding table in pre-trained models like BERT. Our char2subword module builds representations from characters out of the subword vocabulary, and it can be used as a drop-in replacement of the subword embedding table. The module is robust to character-level alterations such as misspellings, word inflection, casing, and punctuation. We integrate it further with BERT through pre-training while keeping BERT transformer parameters fixed--and thus, providing a practical method. Finally, we show that incorporating our module to mBERT significantly improves the performance on the social media linguistic code-switching evaluation (LinCE) benchmark.

Dropout is a powerful and widely used technique to regularize the training of deep neural networks. In this paper, we introduce a simple regularization strategy upon dropout in model training, namely R-Drop, which forces the output distributions of different sub models generated by dropout to be consistent with each other. Specifically, for each training sample, R-Drop minimizes the bidirectional KL-divergence between the output distributions of two sub models sampled by dropout. Theoretical analysis reveals that R-Drop reduces the freedom of the model parameters and complements dropout. Experiments on 5 widely used deep learning tasks (18 datasets in total), including neural machine translation, abstractive summarization, language understanding, language modeling, and image classification, show that R-Drop is universally effective. In particular, it yields substantial improvements when applied to fine-tune large-scale pre-trained models, e.g., ViT, RoBERTa-large, and BART, and achieves state-of-the-art (SOTA) performances with the vanilla Transformer model on WMT14 EnglishtoGerman translation (30.91 BLEU) and WMT14 EnglishtoFrench translation (43.95 BLEU), even surpassing models trained with extra large-scale data and expert-designed advanced variants of Transformer models. Our code is available at GitHub{https://github.com/dropreg/R-Drop}.

Neural sequence-to-sequence models provide a competitive approach to the task of mapping a question in natural language to an SQL query, also referred to as text-to-SQL generation. The Byte-Pair Encoding algorithm (BPE) has previously been used to improve machine translation (MT) between natural languages. In this work, we adapt BPE for text-to-SQL generation. As the datasets for this task are rather small compared to MT, we present a novel stopping criterion that prevents overfitting the BPE encoding to the training set. Additionally, we present AST BPE, which is a version of BPE that uses the Abstract Syntax Tree (AST) of the SQL statement to guide BPE merges and therefore produce BPE encodings that generalize better. We improved the accuracy of a strong attentive seq2seq baseline on five out of six English text-to-SQL tasks while reducing training time by more than 50% on four of them due to the shortened targets. Finally, on two of these tasks we exceeded previously reported accuracies.

We present a deployed system that automates end-to-end customer support workflows inside an enterprise Business Process Management (BPM) platform. The approach is scalable in production and reaches selective automation within two weeks for a new process, leveraging supervision already generated at scale: structured per-case UI interaction traces and low-overhead copilot feedback, where operators either accept a suggestion or provide a correction. A staged deployment pipeline trains a next UI action policy, learns a critic from copilot feedback to calibrate abstention, and executes only high-confidence steps in the background while deferring uncertain decisions to operators and resuming from the updated UI state. This setup lets one operator supervise multiple concurrent sessions and be interrupted only when the system is uncertain. The system operates on a schema-driven view of the BPM interface and includes monitoring and safe fallbacks for production. In production, it automated 45% of sessions and reduced average handling time by 39% without degrading support quality level.

Typically, tokenization is the very first step in most text processing works. As a token serves as an atomic unit that embeds the contextual information of text, how to define a token plays a decisive role in the performance of a model.Even though Byte Pair Encoding (BPE) has been considered the de facto standard tokenization method due to its simplicity and universality, it still remains unclear whether BPE works best across all languages and tasks. In this paper, we test several tokenization strategies in order to answer our primary research question, that is, "What is the best tokenization strategy for Korean NLP tasks?" Experimental results demonstrate that a hybrid approach of morphological segmentation followed by BPE works best in Korean to/from English machine translation and natural language understanding tasks such as KorNLI, KorSTS, NSMC, and PAWS-X. As an exception, for KorQuAD, the Korean extension of SQuAD, BPE segmentation turns out to be the most effective.

Business process automation (BPA) that leverages Large Language Models (LLMs) to convert natural language (NL) instructions into structured business process artifacts is becoming a hot research topic. This paper makes two technical contributions -- (i) FLOW-BENCH, a high quality dataset of paired natural language instructions and structured business process definitions to evaluate NL-based BPA tools, and support bourgeoning research in this area, and (ii) FLOW-GEN, our approach to utilize LLMs to translate natural language into an intermediate representation with Python syntax that facilitates final conversion into widely adopted business process definition languages, such as BPMN and DMN. We bootstrap FLOW-BENCH by demonstrating how it can be used to evaluate the components of FLOW-GEN across eight LLMs of varying sizes. We hope that FLOW-GEN and FLOW-BENCH catalyze further research in BPA making it more accessible to novice and expert users.

Tokenizer adaptation plays an important role in transferring pre-trained language models to new domains or languages. In this work, we address two complementary aspects of this process: vocabulary extension and pruning. The common approach to extension trains a new tokenizer on domain-specific text and appends the tokens that do not overlap with the existing vocabulary, which often results in many tokens that are unreachable or never used. We propose continued BPE training, which adapts a pre-trained tokenizer by continuing the BPE merge learning process on new data. Experiments across multiple languages and model families show that this approach improves tokenization efficiency and leads to better utilization of added vocabulary. We also introduce leaf-based vocabulary pruning, which removes redundant tokens while preserving model quality. Together, these methods provide practical tools for controlled vocabulary modification, which we release as an open-source package.

As the ever-increasing token limits of large language models (LLMs) have enabled long context as input, prompting with single data samples might no longer an efficient way. A straightforward strategy improving efficiency is to batch data within the token limit (e.g., 8k for gpt-3.5-turbo; 32k for GPT-4), which we call BatchPrompt. We have two initial observations for prompting with batched data. First, we find that prompting with batched data in longer contexts will inevitably lead to worse performance, compared to single-data prompting. Second, the performance of the language model is significantly correlated with the positions and order of the batched data, due to the corresponding change in decoder context. To retain efficiency and overcome performance loss, we propose Batch Permutation and Ensembling (BPE), and a novel Self-reflection-guided EArly Stopping (SEAS) technique. Our comprehensive experimental evaluation demonstrates that BPE can boost the performance of BatchPrompt with a striking margin on a range of popular NLP tasks, including question answering (Boolq), textual entailment (RTE), and duplicate questions identification (QQP). These performances are even competitive with/higher than single-data prompting(SinglePrompt), while BatchPrompt requires much fewer LLM calls and input tokens (For SinglePrompt v.s. BatchPrompt with batch size 32, using just 9%-16% the number of LLM calls, Boolq accuracy 90.6% to 90.9% with 27.4% tokens, QQP accuracy 87.2% to 88.4% with 18.6% tokens, RTE accuracy 91.5% to 91.1% with 30.8% tokens). To the best of our knowledge, this is the first work to technically improve prompting efficiency of large language models. We hope our simple yet effective approach will shed light on the future research of large language models. The code will be released.

Introduced by Hinton et al. in 2012, dropout has stood the test of time as a regularizer for preventing overfitting in neural networks. In this study, we demonstrate that dropout can also mitigate underfitting when used at the start of training. During the early phase, we find dropout reduces the directional variance of gradients across mini-batches and helps align the mini-batch gradients with the entire dataset's gradient. This helps counteract the stochasticity of SGD and limit the influence of individual batches on model training. Our findings lead us to a solution for improving performance in underfitting models - early dropout: dropout is applied only during the initial phases of training, and turned off afterwards. Models equipped with early dropout achieve lower final training loss compared to their counterparts without dropout. Additionally, we explore a symmetric technique for regularizing overfitting models - late dropout, where dropout is not used in the early iterations and is only activated later in training. Experiments on ImageNet and various vision tasks demonstrate that our methods consistently improve generalization accuracy. Our results encourage more research on understanding regularization in deep learning and our methods can be useful tools for future neural network training, especially in the era of large data. Code is available at https://github.com/facebookresearch/dropout.

Byte Pair Encoding (BPE) serves as a foundation method for text tokenization in the Natural Language Processing (NLP) field. Despite its wide adoption, the original BPE algorithm harbors an inherent flaw: it inadvertently introduces a frequency imbalance for tokens in the text corpus. Since BPE iteratively merges the most frequent token pair in the text corpus while keeping all tokens that have been merged in the vocabulary, it unavoidably holds tokens that primarily represent subwords of complete words and appear infrequently on their own in the text corpus. We term such tokens as Scaffold Tokens. Due to their infrequent appearance in the text corpus, Scaffold Tokens pose a learning imbalance issue for language models. To address that issue, we propose Scaffold-BPE, which incorporates a dynamic scaffold token removal mechanism by parameter-free, computation-light, and easy-to-implement modifications to the original BPE. This novel approach ensures the exclusion of low-frequency Scaffold Tokens from the token representations for the given texts, thereby mitigating the issue of frequency imbalance and facilitating model training. On extensive experiments across language modeling tasks and machine translation tasks, Scaffold-BPE consistently outperforms the original BPE, well demonstrating its effectiveness and superiority.

Neural Machine Translation (NMT) is an open vocabulary problem. As a result, dealing with the words not occurring during training (a.k.a. out-of-vocabulary (OOV) words) have long been a fundamental challenge for NMT systems. The predominant method to tackle this problem is Byte Pair Encoding (BPE) which splits words, including OOV words, into sub-word segments. BPE has achieved impressive results for a wide range of translation tasks in terms of automatic evaluation metrics. While it is often assumed that by using BPE, NMT systems are capable of handling OOV words, the effectiveness of BPE in translating OOV words has not been explicitly measured. In this paper, we study to what extent BPE is successful in translating OOV words at the word-level. We analyze the translation quality of OOV words based on word type, number of segments, cross-attention weights, and the frequency of segment n-grams in the training data. Our experiments show that while careful BPE settings seem to be fairly useful in translating OOV words across datasets, a considerable percentage of OOV words are translated incorrectly. Furthermore, we highlight the slightly higher effectiveness of BPE in translating OOV words for special cases, such as named-entities and when the languages involved are linguistically close to each other.

Sequence models for binary analysis are bottlenecked by byte-level tokenization: raw bytes waste precious context window capacity for transformers and other neural network architectures, and many existing text-oriented tokenizers fail on arbitrary 0x00--0xFF sequences. To address this issue, we introduce the Binary BPE tokenizer family, a set of cross-platform Byte Pair Encoding (BPE) tokenizers for executables trained on a large corpus of binaries spanning multiple platforms, architectures, and operating systems, including Linux, Windows, macOS, Android, and malware sources. We release trained tokenizers with vocabularies of 4K, 8K, 16K, 32K, and 64K tokens, enabling both systematic scaling studies and practical deployment from resource-constrained edge devices to high-throughput datacenters. These tokenizers discover interpretable patterns (ELF/PE headers, instruction sequences, cross-platform strings) while yielding multi-byte compression per token. On representative uncompressed executables (e.g., ELF/PE/Mach-O rather than compressed APKs), the Binary BPE tokenizers typically allow for roughly 2-3x more binary content per fixed-length transformer context window than raw bytes, enabling more efficient research and practical deployment for content identification, malware detection, reverse engineering, and optimization. We release the trained Binary BPE tokenizers on HuggingFace, providing a drop-in, open-source foundation for binary-focused language models and context-efficient agentic tools.

The success of the machine learning field has reliably depended on training on large datasets. While effective, this trend comes at an extraordinary cost. This is due to two deeply intertwined factors: the size of models and the size of datasets. While promising research efforts focus on reducing the size of models, the other half of the equation remains fairly mysterious. Indeed, it is surprising that the standard approach to training remains to iterate over and over, uniformly sampling the training dataset. In this paper we explore a series of alternative training paradigms that leverage insights from hard-data-mining and dropout, simple enough to implement and use that can become the new training standard. The proposed Progressive Data Dropout reduces the number of effective epochs to as little as 12.4% of the baseline. This savings actually do not come at any cost for accuracy. Surprisingly, the proposed method improves accuracy by up to 4.82%. Our approach requires no changes to model architecture or optimizer, and can be applied across standard training pipelines, thus posing an excellent opportunity for wide adoption. Code can be found here: https://github.com/bazyagami/LearningWithRevision

Large language models route every input through a learned embedding table of shape |V| x d_model, consuming hundreds of millions to billions of trainable parameters at frontier scale. We introduce Kronecker Embeddings, a deterministic byte-level character-position factorization that replaces this table with a fixed encoder and a single learned projection, compatible with standard BPE tokenizers, eliminating 91--94% of input-side trainable parameters at frontier scale. We provide five contributions. First, a cross-model probe across six LMs (135M-671B parameters) shows trained input embeddings cluster typographic variants of the probe word far more than morphological relatives; Kronecker escapes this clustering at the embedding layer. Second, a controlled three-seed comparison on nanoGPT GPT-2 124M over 2.5B tokens of FineWeb-Edu shows Kronecker reaching 2.5 +- 0.2% lower validation loss than the BPE-tied baseline (gap 0.083 +- 0.007 nats, ~9% lower perplexity), needing ~1.43x fewer steps to reach BPE's converged loss. Third, a spelling-robustness probe over 110 clean/typo pairs shows Kronecker preserves the top-1 prediction on 55.5% of pairs vs. 47.3% for BPE (+8.2 pp) and lowers KL by 7.6%, winning or tying in 10 of 11 categories; a generation probe shows Kronecker echoes byte-novel strings and typos through generation where BPE forgets them. Fourth, BPE embedding norm drifts during training while Kronecker projection norm stays near 1.0, consistent with a stable representational target. Fifth, an on-the-fly runtime variant reconstructs embeddings from a 4.5 MB byte buffer rather than a 2.15 GB table at vocabulary 131,072, with 0.01--0.24% step-time overhead. Byte-level locality has a tradeoff: byte-similar but semantically distant pairs (compute/commute, nation/notion) cluster together, shifting disambiguation to early attention layers.

Evaluation harnesses are software systems that orchestrate model evaluation by managing model invocation, data loading, metric computation, and result reporting. Despite their critical role in machine learning infrastructure, their operational challenges and engineering concerns have received limited attention so far. We present an empirical study of 57 evaluation harnesses, deriving a five-stage harness model and classifying 16,560 issues by workflow stage and root cause. Most harness operational challenges concentrate in the Specification stage (41.4% of issues), where harnesses integrate external models, datasets, and scoring judges. The three most frequent root causes of operational challenges are unimplemented features (24.3%), documentation gaps (20.3%), and missing input validation (17.2%), which together account for 61.7% of classified issues, spanning both defects in existing functionality and capability gaps that block intended workflows. Root causes also vary by workflow stage: environment incompatibility and external dependency breakage account for 36.2% of provisioning issues, whereas algorithmic error (25.9%) and validation gap (22.5%) dominate assessment issues. Together, these contributions establish an empirical foundation for treating evaluation engineering as a distinct software engineering concern.

Following the rationale of end-to-end modeling, CTC, RNN-T or encoder-decoder-attention models for automatic speech recognition (ASR) use graphemes or grapheme-based subword units based on e.g. byte-pair encoding (BPE). The mapping from pronunciation to spelling is learned completely from data. In contrast to this, classical approaches to ASR employ secondary knowledge sources in the form of phoneme lists to define phonetic output labels and pronunciation lexica. In this work, we do a systematic comparison between grapheme- and phoneme-based output labels for an encoder-decoder-attention ASR model. We investigate the use of single phonemes as well as BPE-based phoneme groups as output labels of our model. To preserve a simplified and efficient decoder design, we also extend the phoneme set by auxiliary units to be able to distinguish homophones. Experiments performed on the Switchboard 300h and LibriSpeech benchmarks show that phoneme-based modeling is competitive to grapheme-based encoder-decoder-attention modeling.

Pre-tokenization, the initial step in many modern tokenization pipelines, segments text into smaller units called pretokens, typically splitting on whitespace and punctuation. While this process encourages having full, individual words as tokens, it introduces a fundamental limitation in most tokenization algorithms such as Byte Pair Encoding (BPE). Specifically, pre-tokenization causes the distribution of tokens in a corpus to heavily skew towards common, full-length words. This skewed distribution limits the benefits of expanding to larger vocabularies, since the additional tokens appear with progressively lower counts. To overcome this barrier, we propose BoundlessBPE, a modified BPE algorithm that relaxes the pretoken boundary constraint. Our approach selectively merges two complete pretokens into a larger unit we term a superword. Superwords are not necessarily semantically cohesive. For example, the pretokens " of" and " the" might be combined to form the superword " of the". This merging strategy results in a substantially more uniform distribution of tokens across a corpus than standard BPE, and compresses text more effectively, with an approximate 20% increase in bytes per token.

Large Language Models (LLMs) are being increasingly used in software engineering tasks, with an increased focus on bug report resolution over the past year. However, most proposed systems fail to properly handle uncertain or incorrect inputs and outputs. Existing LLM-based tools and coding agents respond to every issue and generate a patch for every case, even when the input is vague or their own output is incorrect. There are no mechanisms in place to abstain when confidence is low. This leads to unreliable behaviour, such as hallucinated code changes or responses based on vague issue reports. We introduce BouncerBench, a benchmark that evaluates whether LLM-based software agents can refuse to act when inputs are ill-defined or refuse to respond when their own outputs are likely to be incorrect. Unlike prior benchmarks that implicitly incentivize models to generate responses even when uncertain, BouncerBench aims to improve precision by targeting two overlooked failure points: (1) vague or underspecified issue descriptions in tickets and (2) logically or functionally incorrect code patches created by the system. It measures whether proposed systems can distinguish actionable issues from vague tickets and valid patches from untrustworthy ones. We also implement a basic input and output bouncer, evaluating how well current LLMs can abstain when needed. Our results show that most models fail to abstain from underspecified inputs or incorrect outputs. Hence, we conclude that there is significant room for improvement before LLMs can be trusted to make correct decisions and recommendations in real-world software engineering workflows. BouncerBench provides a first step toward evaluating and building more cautious, trustworthy code agents. The replication package, dataset, and leaderboard can be found at bouncerbench.com

Constructing large-scale datasets for the GitHub issue resolution task is crucial for both training and evaluating the software engineering capabilities of Large Language Models (LLMs). However, the traditional process for creating such benchmarks is notoriously challenging and labor-intensive, particularly in the stages of setting up evaluation environments, grading test outcomes, and validating task instances. In this paper, we propose SWE-Factory, an automated pipeline designed to address these challenges. To tackle these issues, our pipeline integrates three core automated components. First, we introduce SWE-Builder, a multi-agent system that automates evaluation environment construction, which employs four specialized agents that work in a collaborative, iterative loop and leverages an environment memory pool to enhance efficiency. Second, we introduce a standardized, exit-code-based grading method that eliminates the need for manually writing custom parsers. Finally, we automate the fail2pass validation process using these reliable exit code signals. Experiments on 671 issues across four programming languages show that our pipeline can effectively construct valid task instances; for example, with GPT-4.1-mini, our SWE-Builder constructs 269 valid instances at 0.045 per instance, while with Gemini-2.5-flash, it achieves comparable performance at the lowest cost of 0.024 per instance. We also demonstrate that our exit-code-based grading achieves 100% accuracy compared to manual inspection, and our automated fail2pass validation reaches a precision of 0.92 and a recall of 1.00. We hope our automated pipeline will accelerate the collection of large-scale, high-quality GitHub issue resolution datasets for both training and evaluation. Our code and datasets are released at https://github.com/DeepSoftwareAnalytics/swe-factory.

Tokenization is the first -- and often least scrutinized -- step of most NLP pipelines. Standard algorithms for learning tokenizers rely on frequency-based objectives, which favor languages dominant in the training data and consequently leave lower-resource languages with tokenizations that are disproportionately longer, morphologically implausible, or even riddled with <UNK> placeholders. This phenomenon ultimately amplifies computational and financial inequalities between users from different language backgrounds. To remedy this, we introduce Parity-aware Byte Pair Encoding (BPE), a variant of the widely-used BPE algorithm. At every merge step, Parity-aware BPE maximizes the compression gain of the currently worst-compressed language, trading a small amount of global compression for cross-lingual parity. We find empirically that Parity-aware BPE leads to more equitable token counts across languages, with negligible impact on global compression rate and no substantial effect on language-model performance in downstream tasks.

Byte Pair Encoding (BPE) tokenizers, widely used in Large Language Models, face challenges in multilingual settings, including penalization of non-Western scripts and the creation of tokens with partial UTF-8 sequences. Pretokenization, often reliant on complex regular expressions, can also introduce fragility and unexpected edge cases. We propose SCRIPT (Script Category Representation in PreTokenization), a novel encoding scheme that bypasses UTF-8 byte conversion by using initial tokens based on Unicode script and category properties. This approach enables a simple, rule-based pretokenization strategy that respects script boundaries, offering a robust alternative to pretokenization strategies based on regular expressions. We also introduce and validate a constrained BPE merging strategy that enforces character integrity, applicable to both SCRIPT-BPE and byte-based BPE. Our experiments demonstrate that SCRIPT-BPE achieves competitive compression while eliminating encoding-based penalties for non-Latin-script languages.

Tokenization is a crucial step in NLP, especially with the rise of large language models (LLMs), impacting downstream performance, computational cost, and efficiency. Existing LLMs rely on the classical Byte-pair Encoding (BPE) algorithm for subword tokenization that greedily merges frequent character bigrams, often leading to segmentation that does not align with linguistically meaningful units. To address this, we propose morphology-aware segmentation as a pre-tokenization step before applying BPE. To facilitate morphology-aware segmentation, we create a novel dataset for Hindi and Marathi, incorporating sandhi splitting to enhance the subword tokenization. Experiments on downstream tasks show that morphologically grounded tokenization improves machine translation and language modeling performance. Additionally, to handle the dependent vowels common in syllable-based writing systems used by Indic languages, we propose Constrained BPE (CBPE), an extension to the standard BPE algorithm incorporating script-specific constraints. In particular, CBPE handles dependent vowels to form a cohesive unit with other characters instead of occurring as a single unit. Our results show that CBPE achieves a 1.68\% reduction in fertility scores while maintaining comparable or improved downstream performance in machine translation and language modeling, offering a computationally efficient alternative to standard BPE. Moreover, to evaluate segmentation across different tokenization algorithms, we introduce a new human evaluation metric, EvalTok, enabling more human-grounded assessment.

AI systems can fail silently. The failure propagates through training loops, evaluation pipelines, and production monitoring stacks until downstream harm makes it visible. This paper introduces evaluation blindness: a measurement function M exhibits evaluation blindness with respect to failure class F when it produces readings indistinguishable from a healthy state while the system is actually failing, with no auxiliary signal flagging the gap. The problem surfaces at two lifecycle stages the literature has treated separately. At training time, reward models are gamed, importance-sampling corrections are silently miscalculated, and benchmark contamination inflates fine-tuning evaluations, all while loss curves look healthy and gradient updates proceed normally. At deployment time, monitoring fails to catch six classes of production failure, including an Operational category that is 100% silent by structural definition. We provide a formal detectability predicate unifying both stages. Four training-time case studies trace concrete breakdowns, including a real implementation bug in TRL PR #6594 where gradients are corrupted as loss decreases normally. A six-class taxonomy validated against 50 real-world incidents from court documents and regulatory filings finds that 53% of verifiable public failures were silent. A failure budget framework ties acceptable failure rates to use-case risk class. The implication is direct: measurement infrastructure is a correctness concern across the full AI lifecycle, not just at evaluation time. Data, code, and taxonomy schema are at https://github.com/priyanka25aug/llm-failure-taxonomy.

Large Language Models (LLMs) in Software Engineering (SE) can offer assistance for coding. To facilitate a rigorous evaluation of LLMs in practical coding contexts, Carlos et al. introduced the SWE-bench dataset, which comprises 2,294 real-world GitHub issues and their corresponding pull requests, collected from 12 widely used Python repositories. Several impressive LLM-based toolkits recently are developed and evaluated on this dataset. However, a systematic evaluation of the quality of SWE-bench remains missing. In this paper, we addressed this gap by presenting an empirical analysis of the SWE-bench dataset. We conducted a manual screening of instances where SWEAgent + GPT-4 successfully resolved issues by comparing the model-generated patches with the actual pull requests. SWE-Agent+GPT-4 was at the top of SWE-bench leaderboard during the time of our study. Our analysis reveals some critical issues with the SWE-bench dataset: 1) 32.67% of the successful patches involve cheating as the solutions were directly provided in the issue report or the comments. We refer to as solution leakage problem. 2) 31.08% of the passed patches are suspicious patches due to weak test cases, i.e., the tests were not adequate to verify the correctness of a patch. When we filtered out these problematic issues, the resolution rate of SWE-Agent+GPT-4 dropped from 12.47% to 3.97%. We also observed that the same data quality issues also exist in the two variants of SWE-bench, i.e., SWE-bench Lite and SWE-Bench Verified. In addition, over 94% of the issues were created before LLM's knowledge cutoff dates, posing potential data leakage issues.

LLM-agent budget overruns are a documented production failure class: a single retry loop can spend thousands of dollars before an operator notices, and the in-process integrity properties that would prevent it (no aliasing, no double-spend, no use-after-delegation of a cost-bearing value) are enforced, if at all, by ad-hoc wrappers rather than by the type system. Our central contribution is empirical: a catalog of 63 confirmed production incidents from 21 orchestration frameworks (2023-2026), each backed by a quoted GitHub issue and, where reported, a dollar loss, organized into an eight-cluster failure taxonomy (inter-rater Cohen's kappa = 0.837, N = 113), plus 47 supplementary structural entries. As one mitigation evaluated against this taxonomy, we build token-budgets, an 1,180-line Rust crate (no unsafe) that operationalizes affine ownership so that cloning, double-spending, or using a budget after delegating it are compile errors rather than runtime hazards an operator must remember to avoid. The dollar cap is runtime arithmetic under an estimator assumption; the affine layer makes that arithmetic non-bypassable. On single-agent workloads a 4-line Python counter matches the crate at 0/30 overshoot, so the distinguishing value is non-bypassability under operator error in multi-agent delegation: the delegation-fanout race documented in 11 incidents is rejected by the borrow checker at compile time, while the same pattern under asyncio overshoots 30/30 and three disciplined alternatives overshoot 0/30. Across five runtimes, three providers, and a temperature-stratified live-API test (N = 160), the approach reports zero cap violations and zero false refusals, at operational parity with concurrent work. Static over-reservation is 4-6x (2.11x adaptive). Binary-level cap-soundness on the running binary is left open.